Pryse Kenneth M, Nekouzadeh Ali, Genin Guy M, Elson Elliot L, Zahalak George I
Department of Biochemistry and Molecular Biophysics, Washington University, St. Louis, MO 63110-1093, USA.
Ann Biomed Eng. 2003 Nov;31(10):1287-96. doi: 10.1114/1.1615571.
Paired incremental uniaxial step (i.e., relaxation) and ramp tests were conducted simultaneously on four (nominally) identical samples of type I collagen gel, over a direct strain range 0 < epsilon < 0.2. The paired step and ramp responses could not both be predicted by a simple viscoelastic constitutive relation (either linear or Fung-type), but could be predicted reasonably accurately by a general nonlinear viscoelastic relation with a strain-dependent relaxation spectrum, of the form sigma(t) = f(t)-infinity g(t-tau,epsilon)[d(epsilon)(tau)/d(tau)]d(tau). Based on a four-term exponential-series approximation, we measured the stiffness moduli and time constants of the relaxation function, g(t,epsilon), for the four gel samples that we tested, and found that the time constants were independent of strain but the moduli increased strongly with strain. Further, we found that the time constants did not vary across the four gels, but the moduli varied by a factor of about 2 across the gels. Some additional tests show features of the response of collagen gels to cycles of application and removal of loading.
在0 < ε < 0.2的直接应变范围内,对四个(名义上)相同的I型胶原蛋白凝胶样本同时进行了成对的增量单轴步进(即松弛)和斜坡测试。简单的粘弹性本构关系(线性或冯氏类型)无法同时预测成对的步进和斜坡响应,但可以通过具有应变依赖松弛谱的一般非线性粘弹性关系相当准确地预测,其形式为σ(t) = ∫[f(t - τ, ε)[dε(τ)/dτ]]dτ。基于四项指数级数近似,我们测量了所测试的四个凝胶样本的松弛函数g(t, ε)的刚度模量和时间常数,发现时间常数与应变无关,但模量随应变强烈增加。此外,我们发现四个凝胶的时间常数没有变化,但模量在凝胶之间变化了约2倍。一些额外的测试显示了胶原蛋白凝胶对加载施加和去除循环的响应特征。