Norman T L, Vashishth D, Burr D B
Department of Mechanical and Aerospace Engineering, West Virginia University, Morgantown 26506.
J Biomech. 1992 Dec;25(12):1489-92. doi: 10.1016/0021-9290(92)90061-5.
When testing for the effects of bone orientation on mode I fracture toughness, compact tension specimens are grooved with a V-notch to provide a crack guide. The effect of grooving on the expressions for the critical stress intensity factor (Kc) and the critical strain energy release rate (Gc) for mode I fracture toughness was investigated. Experiments were performed using grooved and ungrooved bovine compact tension specimens. The results indicate that the standard expression used to determine Kc for a compact tension specimen requires modification. The thickness (B) must be modified to account for the thickness between the grooves (Bn). The thickness used in the standard expression is replaced by an effective thickness written as (BBn)0.5. It was also found that the thickness between the grooves should be used in the standard formula for Gc.
