Suppr超能文献

微针孔成像中的光子穿透与散射:蒙特卡罗研究

Photon penetration and scatter in micro-pinhole imaging: a Monte Carlo investigation.

作者信息

van der Have Frans, Beekman Freek J

机构信息

Image Sciences Institute, UMC Utrecht STR 5.203, Universiteitsweg 100. 3584 CG Utrecht, The Netherlands.

出版信息

Phys Med Biol. 2004 Apr 21;49(8):1369-86. doi: 10.1088/0031-9155/49/8/001.

Abstract

Pinhole SPECT is rapidly gaining popularity for imaging laboratory animals using gamma-emitting molecules. Penetration and scattering of gamma radiation in the pinhole edge material can account for a significant fraction of the total number of photons detected, particularly if the pinholes have small diameters. This study characterizes the effects of penetration and scatter with micro-pinholes made of lead, tungsten, gold and platinum. Monte Carlo simulations are performed for 1-125 (27-35 keV) and Tc-99m (140 keV) point sources with pinhole diameters ranging from 50 to 500 microm. The simulations account for the effects of photo-electric interaction, Rayleigh scattering, Compton scattering, ionization, bremsstrahlung and electron multiple scattering. As a typical example, in the case of a Tc-99m point source and pinholes with a diameter of 300 microm in gold or platinum, approximately 55% of the photons detected resulted from penetration and approximately 3% from scatter. For pinhole diameters ranging from 100 to 500 microm, the penetration fraction for tungsten and lead was approx a factor of 1.0 to 1.6 higher and the scatter fraction was 1.0 to 1.8 times higher than in case of gold or platinum. Using I-125 instead of Tc-99m decreases the penetration fraction by a factor ranging from 3 to 11 and the scatter fraction by a factor ranging from 12 to 40. For all materials studied, the total amounts of penetrated and scattered photons changed approximately linearly with respect to the pinhole diameter.

摘要

针孔单光子发射计算机断层扫描(Pinhole SPECT)在使用发射伽马射线的分子对实验动物进行成像方面正迅速受到欢迎。伽马射线在针孔边缘材料中的穿透和散射可能占检测到的光子总数的很大一部分,特别是当针孔直径较小时。本研究表征了由铅、钨、金和铂制成的微针孔的穿透和散射效应。对针孔直径范围为50至500微米的1-125(27-35 keV)和锝-99m(140 keV)点源进行了蒙特卡罗模拟。这些模拟考虑了光电相互作用、瑞利散射、康普顿散射、电离、韧致辐射和电子多重散射的影响。作为一个典型例子,在锝-99m点源以及直径为300微米的金或铂针孔的情况下,检测到的光子中约55%是由穿透产生的,约3%是由散射产生的。对于直径范围为100至500微米的针孔,钨和铅的穿透分数比金或铂的情况高约1.0至1.6倍,散射分数高1.0至1.8倍。使用碘-125代替锝-99m会使穿透分数降低3至11倍,散射分数降低12至40倍。对于所有研究的材料,穿透和散射光子的总量随针孔直径大致呈线性变化。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验