Water-swellable polyelectrolyte microgels polymerized in an inverse microemulsion using a nonionic surfactant.

A series of poly(dimethylacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid) microgels slightly crosslinked by methylene-bis-acrylamide (MBA) were polymerized in a novel inverse microemulsion polymerization (IMEP) system. To determine a suitable composition of the IMEP system, the phase diagram of a pseudoternary system was made. The pseudoternary polymerization system consisted of n-hexane, a nonionic surfactant (polyoxyethylene oleyl ether, C18En), and an aqueous monomer solution. Polymerization was performed in a single-phase reversed micelle solution. The reversed micelles were about 50 nm in diameter, as determined by FF-TEM. The viscometric characteristics of the polymers extracted from the IMEP system were studied in 3 mM sodium chloride aqueous solution. The intrinsic viscosity values for the noncrosslinked and crosslinked (0.1 mol% MBA was incorporated) samples were 25 and 7.4 dl/g, respectively. The overlap concentration (c*) of crosslinked polymer microgel occurred at c[eta] = 1 in the solvent. When the volume fraction (phi) of the microgel was 0.7, the value of the apparent yield stress of the microgel solution was observed. These results show that the microgel has a significant thickening effect above c* due to friction between the microgel particles. It is assumed that the microgels polymerized in a confined space retain the shape or size of the nanosized reactor with a diameter on the order of 50 nm.