Chahine Nadeen O, Wang Christopher C-B, Hung Clark T, Ateshian Gerard A
Musculoskeletal Biomechanics Laboratory, Department of Biomedical Engineering, Columbia University, New York, NY 10027, USA.
J Biomech. 2004 Aug;37(8):1251-61. doi: 10.1016/j.jbiomech.2003.12.008.
Articular cartilage exhibits complex mechanical properties such as anisotropy, inhomogeneity and tension-compression nonlinearity. This study proposes and demonstrates that the application of compressive loading in the presence of osmotic swelling can be used to acquire a spectrum of incremental cartilage moduli (EYi) and Poisson's ratios (upsilon ij) from tension to compression. Furthermore, the anisotropy of the tissue can be characterized in both tension and compression by conducting these experiments along three mutually perpendicular loading directions: parallel to split-line (1-direction), perpendicular to split-line (2-direction) and along the depth direction (3-direction, perpendicular to articular surface), accounting for tissue inhomogeneity between the surface and deep layers in the latter direction. Tensile moduli were found to be strain-dependent while compressive moduli were nearly constant. The peak tensile (+) Young's moduli in 0.15M NaCl were E+Y1=3.1+/-2.3, E+Y2=1.3+/-0.3, E+Y3(Surface)=0.65+/-0.29 and E+Y3(Deep)=2.1+/-1.2 MPa. The corresponding compressive (-) Young's moduli were E-Y1=0.23+/-0.07, E-Y2=0.22+/-0.07, E-Y3(Surface)=0.18+/-0.07 and E-Y3(Deep)=0.35+/-0.11 MPa. Peak tensile Poisson's ratios were upsilon+12=0.22+/-0.06, upsilon+21=0.13+/-0.07, upsilon+31(Surface)=0.10+/-0.03 and upsilon+31(Deep)=0.20+/-0.05 while compressive Poisson's ratios were upsilon-12=0.027+/-0.012, upsilon-21=0.017+/-0.07, upsilon-31(Surface)=0.034+/-0.009 and upsilon-31(Deep)=0.065+/-0.024. Similar measurements were also performed at 0.015 M and 2 M NaCl, showing strong variations with ionic strength. Results indicate that (a) a smooth transition occurs in the stress-strain and modulus-strain responses between the tensile and compressive regimes, and (b) cartilage exhibits orthotropic symmetry within the framework of tension-compression nonlinearity. The strain-softening behavior of cartilage (the initial decrease in EYi with increasing compressive strain) can be interpreted in the context of osmotic swelling and tension-compression nonlinearity.
关节软骨具有复杂的力学性能,如各向异性、不均匀性和拉压非线性。本研究提出并证明,在存在渗透肿胀的情况下施加压缩载荷,可用于获取从拉伸到压缩的一系列增量软骨模量(EYi)和泊松比(υij)。此外,通过沿三个相互垂直的加载方向进行这些实验,可在拉伸和压缩状态下表征组织的各向异性:平行于分裂线(1方向)、垂直于分裂线(2方向)和沿深度方向(3方向,垂直于关节表面),考虑到后一方向上表面层和深层之间的组织不均匀性。发现拉伸模量与应变有关,而压缩模量几乎恒定。在0.15M NaCl中,峰值拉伸(+)杨氏模量为E+Y1 = 3.1±2.3、E+Y2 = 1.3±0.3、E+Y3(表面)= 0.65±0.29和E+Y3(深层)= 2.1±1.2 MPa。相应的压缩(-)杨氏模量为E-Y1 = 0.23±0.07、E-Y2 = 0.22±0.07、E-Y3(表面)= 0.18±0.07和E-Y3(深层)= 0.35±0.11 MPa。峰值拉伸泊松比为υ+12 = 0.22±0.06、υ+21 = 0.13±0.07、υ+31(表面)= 0.10±0.03和υ+31(深层)= 0.20±0.05,而压缩泊松比为υ-12 = 0.027±0.012、υ-21 = 0.017±0.07、υ-31(表面)= 0.034±0.009和υ-31(深层)= 0.065±0.024。还在0.015M和2M NaCl下进行了类似测量,结果显示随离子强度有很大变化。结果表明:(a)在拉伸和压缩状态之间的应力-应变和模量-应变响应中发生了平滑过渡;(b)软骨在拉压非线性框架内表现出正交各向异性对称。软骨的应变软化行为(EYi随压缩应变增加而最初下降)可在渗透肿胀和拉压非线性的背景下进行解释。