Suppr超能文献

通过三硅烷在高温超临界溶剂中的热解合成非晶硅胶体。

Synthesis of amorphous silicon colloids by trisilane thermolysis in high temperature supercritical solvents.

作者信息

Pell Lindsay E, Schricker April D, Mikulec Frederic V, Korgel Brian A

机构信息

Department of Chemical Engineering, Texas Materials Institute, Center for Nano- and Molecular Science and Technology, University of Texas, Austin, Texas 78712-1062, USA.

出版信息

Langmuir. 2004 Aug 3;20(16):6546-8. doi: 10.1021/la048671o.

Abstract

Colloidal submicrometer-diameter amorphous silicon (a-Si) particles are synthesized with >90% yield by thermal decomposition of trisilane (Si3H8) in supercritical hexane at temperatures ranging from 400 to 500 degrees C and pressures up to 345 bar. A range of synthetic conditions was explored to optimize the quality of the product. Under the appropriate synthetic conditions, the colloids are spherical and unagglomerated. The colloids can be produced with average diameters ranging from 50 to 500 nm by manipulating the precursor concentration, temperature, and pressure. Relatively narrow particle size distributions, as measured by transmission electron microscopy (TEM), with standard deviations about the mean as low as approximately +/-10% could be obtained in some cases. We explored the thermal annealing of the amorphous silicon particles after isolation from the reactor and found that crystallization to diamond structure silicon occurred at temperatures as low as 650 degrees C. The amorphous and crystalline materials were characterized by X-ray diffraction and high resolution scanning and transmission electron microscopy.

摘要

通过在400至500摄氏度的温度以及高达345巴的压力下,在超临界己烷中热分解三硅烷(Si3H8),以大于90%的产率合成了直径为亚微米级的胶体非晶硅(a-Si)颗粒。探索了一系列合成条件以优化产物质量。在合适的合成条件下,胶体呈球形且未团聚。通过控制前驱体浓度、温度和压力,可以制备出平均直径为50至500纳米的胶体。在某些情况下,通过透射电子显微镜(TEM)测量,可获得相对较窄的粒径分布,标准偏差相对于平均值低至约±10%。我们研究了从反应器中分离出的非晶硅颗粒的热退火过程,发现其在低至650摄氏度的温度下结晶为金刚石结构的硅。通过X射线衍射、高分辨率扫描和透射电子显微镜对非晶态和晶态材料进行了表征。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验