Suppr超能文献

通过外周静脉穿刺中心静脉导管进行CT造影剂的高压注射。

Power injection of contrast media via peripherally inserted central catheters for CT.

作者信息

Coyle Douglas, Bloomgarden Daniel, Beres Robert, Patel Shirish, Sane Shekhar, Hurst Emil

机构信息

Department of Radiology, St. Luke's Medical Center, 2900 West Oklahoma Avenue, Milwaukee, Wisconsin 53715, USA.

出版信息

J Vasc Interv Radiol. 2004 Aug;15(8):809-14. doi: 10.1097/01.RVI.0000128812.20864.EC.

Abstract

PURPOSE

To evaluate patient safety, catheter rupture rates, and computed tomography (CT) image quality when using peripherally inserted central catheters (PICCs) in vivo for the power injection of CT contrast media at standard injection rates.

MATERIALS AND METHODS

A prospective study to evaluate the safety and effectiveness of power injection of contrast media via indwelling PICCs was performed. Single-lumen and double-lumen polyurethane PICCs (5 F) were injected in vivo with contrast media for clinical CT examinations at injection rates ranging from 1 mL/sec to 4 mL/sec. Data collected included PICC rupture rate, patient complications, injection rate, peak injection pressure, PICC length, PICC age, and quality of contrast enhancement on the CT images.

RESULTS

One hundred ten power injections of PICCs for CT examinations were performed. There were 12 injections of single-lumen PICCs and 98 injections of double-lumen PICCs. The most common injection rate was 2 mL/sec, accounting for 89 of the 110 injections (81%). Two PICCs ruptured during power injection, both as a result of operator error. One of the PICCs that ruptured was clamped at the time of injection and the other one was kinked at its venous entry site. One additional PICC showed evidence of dysfunction; it ballooned without actually rupturing. No significant patient complications occurred. Contrast enhancement of the CT images was subjectively rated as average or above average in 95% of cases.

CONCLUSIONS

Contrast media can be power-injected via PICCs for routine CT examinations at a rate of 2 mL/sec, yielding satisfactory image quality without exposing patients to significant additional risk. Power injection rates greater than 2 mL/sec, as are typically used in CT angiography applications, were not fully evaluated by this study.

摘要

目的

评估在体内使用外周静脉穿刺中心静脉导管(PICC)以标准注射速率进行CT造影剂动力注射时的患者安全性、导管破裂率和计算机断层扫描(CT)图像质量。

材料与方法

进行了一项前瞻性研究,以评估通过留置PICC进行造影剂动力注射的安全性和有效性。单腔和双腔聚氨酯PICC(5F)在体内以1 mL/秒至4 mL/秒的注射速率注射造影剂用于临床CT检查。收集的数据包括PICC破裂率、患者并发症、注射速率、注射峰值压力、PICC长度、PICC使用时长以及CT图像上的造影增强质量。

结果

共进行了110次用于CT检查的PICC动力注射。其中单腔PICC注射12次,双腔PICC注射98次。最常用的注射速率为2 mL/秒,在110次注射中有89次(81%)采用此速率。两次动力注射期间PICC发生破裂,均为操作失误所致。其中一根破裂的PICC在注射时被夹住,另一根在静脉入口处发生扭结。另有一根PICC显示功能障碍迹象;它出现膨胀但未实际破裂。未发生明显的患者并发症。在95%的病例中,CT图像的造影增强主观评分为中等或中等以上。

结论

对于常规CT检查,造影剂可通过PICC以2 mL/秒的速率进行动力注射,产生令人满意的图像质量,且不会使患者面临显著的额外风险。本研究未对CT血管造影应用中通常使用的大于2 mL/秒的动力注射速率进行全面评估。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验