Hong-Wan Ng, Ee-Chon Teo, Qing-Hang Zhang
School of Mechanical and Production Engineering, Nanyang Technological University, Singapore.
Spine (Phila Pa 1976). 2004 Aug 15;29(16):1737-45; discussion 1746. doi: 10.1097/01.brs.0000134574.36487.eb.
The biomechanical responses resulting from laminectomy with graded unilateral and bilateral facetectomy were quantified using a three-dimensional nonlinear finite element model of the C2-C7 motion segments.
To study the influence of laminectomy with graded unilateral and bilateral facetectomy on the cervical spinal biomechanics.
Cervical spinal stenosis is a condition that is caused by the narrowing of the spinal canal. Laminectomy and facetectomy are commonly used surgical procedures for decompressing cervical spinal stenosis. Resection of the posterior structures causes instability and affects the internal stresses of the cervical spinal components. However, the influence of these surgical procedures on the biomechanical responses of the cervical spine has not been studied.
A nonlinear finite element model of the intact C2-C7 was constructed and validated. Ten surgically altered models were created from the intact model and were tested under physiologic loading. Because of the inclusion of five motion segments, it was possible to determine the intersegmental responses and internal cortical shell and disc stresses in the adjacent altered and unaltered spinal components.
Under combined flexion and extension, intersegmental motions at C4-C5 and C5-C6 increased significantly after C5 laminectomy. Subsequent facetectomy performed at C5 and C6 on the laminectomized model only affected the responses at the C5-C6 segment. Overall, slight intersegmental responses of up to 5% were observed at the adjacent levels of C3-C4 and C6-C7. Laminectomy did not cause any significant increase in the intersegmental motions under lateral bending and axial rotation. Extending the surgical procedures to unilateral and bilateral facetectomy only increased the intersegmental motions slightly. Similar increases in the intervertebral disc and the cortical shell stresses were observed. These findings may partially explain the clinical observations of enhanced osteophytes formation.
This study provides a better understanding of the surgically altered cervical spinal biomechanics and may help formulate treatment strategies such as spinal implants.
使用C2 - C7运动节段的三维非线性有限元模型,对分级单侧和双侧小关节切除术后椎板切除所产生的生物力学反应进行量化。
研究分级单侧和双侧小关节切除术后椎板切除术对颈椎生物力学的影响。
颈椎管狭窄是一种由椎管狭窄引起的病症。椎板切除术和小关节切除术是常用于减压颈椎管狭窄的外科手术。后部结构的切除会导致不稳定并影响颈椎部件的内部应力。然而,这些外科手术对颈椎生物力学反应的影响尚未得到研究。
构建并验证完整C2 - C7的非线性有限元模型。从完整模型创建了10个手术改变模型,并在生理负荷下进行测试。由于包含5个运动节段,因此可以确定相邻改变和未改变的脊柱部件中的节段间反应以及内部皮质壳和椎间盘应力。
在屈伸联合作用下,C5椎板切除术后C4 - C5和C5 - C6的节段间运动显著增加。随后在C5椎板切除模型上C5和C6进行的小关节切除术仅影响C5 - C6节段的反应。总体而言,在C3 - C4和C6 - C7相邻节段观察到高达5%的轻微节段间反应。椎板切除术在侧弯和轴向旋转时并未导致节段间运动有任何显著增加。将手术操作扩展到单侧和双侧小关节切除术仅使节段间运动略有增加。在椎间盘和皮质壳应力方面也观察到类似的增加。这些发现可能部分解释了骨赘形成增加的临床观察结果。
本研究能更好地理解手术改变后的颈椎生物力学,并可能有助于制定诸如脊柱植入物等治疗策略。