Suppr超能文献

利用双能X线吸收法测量老年女性人群跟骨骨密度:与髋部和脊柱测量结果的横断面研究比较

Bone mineral density measurement in the calcaneus with DXL: comparison with hip and spine measurements in a cross-sectional study of an elderly female population.

作者信息

Salminen H, Sääf M, Ringertz H, Strender L-E

机构信息

Center of Family Medicine, Alfred Nobels allé 12, 14183 Huddinge, Sweden.

出版信息

Osteoporos Int. 2005 May;16(5):541-51. doi: 10.1007/s00198-004-1719-x. Epub 2004 Sep 21.

Abstract

We investigated the relationship between calcaneal and axial bone mineral density in an elderly female population. We also investigated the influence of changing the reference populations on T-score values. Bone mineral density (BMD) was determined in 388 women (mean age 73 years) participating in a cross-sectional study. BMD values were determined at the left hip and the lumbar spine, L1-L4, using Hologic QDR 4500 equipment for dual X-ray absorptiometry (DXA). The calcaneal measurements were made with DEXA-T, a device using a dual X-ray and laser (DXL) technique that combines DXA measurement with measurement of the heel thickness using a laser reflection technique. DEXA-T is an older version of the Calscan DXL device now commercially available. T-score values were calculated for hip measurements with both the original reference population of the Hologic device and the NHANES III reference population. T scores for heel measurements were calculated with the original reference population of the peripheral device and the Calscan database, a new calcaneal reference population. Changing the reference populations had a great influence on both the heel and the hip T scores, especially those of the femoral neck where the percentage of subjects identified as osteoporotic decreased from 53% to 23%. We conclude that, with the NHANES III and the larger Calscan database, using the cut-off point of -2.5 SD, the heel measurements had optimal accuracy for detecting osteoporosis at either the combination of the lumbar spine and the femoral neck or the combination of the lumbar spine, the femoral neck, the total hip and the trochanter. BMD measurements of the calcaneus with DXL correlated fairly well with measurements at axial sites at the group level, while in individual subjects large deviations were observed between all the measured sites. We also conclude that the influence of the reference populations on the T scores is substantial when different DXA methods are being compared; the total number of subjects classified as osteoporotic varied from 7% to 53% between the sites and with different reference populations.

摘要

我们在老年女性人群中研究了跟骨与轴向骨密度之间的关系。我们还研究了改变参考人群对T值的影响。对参与一项横断面研究的388名女性(平均年龄73岁)测定了骨密度(BMD)。使用Hologic QDR 4500双能X线吸收仪(DXA)设备测定左侧髋部和腰椎(L1-L4)的BMD值。跟骨测量使用DEXA-T进行,该设备采用双能X线和激光(DXL)技术,将DXA测量与利用激光反射技术测量足跟厚度相结合。DEXA-T是目前市售的Calscan DXL设备的旧版本。分别使用Hologic设备的原始参考人群和美国国家健康与营养检查调查(NHANES)III参考人群计算髋部测量的T值。足跟测量的T值使用外周设备的原始参考人群和一个新的跟骨参考人群Calscan数据库进行计算。改变参考人群对足跟和髋部T值均有很大影响,尤其是股骨颈的T值,被认定为骨质疏松的受试者百分比从53%降至23%。我们得出结论,对于NHANES III和更大的Calscan数据库,采用-2.5标准差的切点时,足跟测量对于检测腰椎和股骨颈组合部位或腰椎、股骨颈、全髋和大转子组合部位的骨质疏松具有最佳准确性。在组水平上,使用DXL进行的跟骨BMD测量与轴向部位的测量结果相关性较好,而在个体受试者中,所有测量部位之间均观察到较大偏差。我们还得出结论,在比较不同的DXA方法时,参考人群对T值的影响很大;不同部位以及不同参考人群之间,被归类为骨质疏松的受试者总数在7%至53%之间变化。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验