Fan Yuwei, Duan Ke, Wang Rizhi
Department of Materials Engineering, The University of British Columbia, # 309-6350 Stores Road, Vancouver, BC, Canada V6T 1Z4.
Biomaterials. 2005 May;26(14):1623-32. doi: 10.1016/j.biomaterials.2004.06.019.
A composite coating that is composed of collagen protein and calcium phosphate minerals is considered to be bioactive and may enhance bone growth and fixation of metallic orthopedic implants. In this study, we have successfully developed a uniform collagen fibril/octacalcium phosphate composite coating on silicon substrate by electrolytic deposition (ELD). The coating deposition was done through applying a constant potential to the cathode in a three-electrode electrochemistry cell that contain a mild acidic (pH 4.8-5.3) aqueous solution of collagen molecules, calcium and phosphate ions. The coating process involved self-assembly of collagen fibrils and the deposition of calcium phosphate minerals as a result of cathode reaction and local pH increase. The two steps could be synchronized to form a bone-like composite at nanometer scale through proper adjustment of the solution and deposition parameters. Coating morphology, crystal structure and compositions were analyzed by optical and fluorescence microscopy, scanning and transmission electron microscopy, energy dispersive X-ray analysis, inductively coupled argon plasma optical emission spectrophotometry, and Fourier-transformed infrared spectroscopy. Under typical deposition conditions, the cathode (Si) surface formed a thin (100 nm) layer of calcium phosphate coating, on top of which a thick (approximately 100 microm) composite layer formed. The porous composite layer consists of a collagen fibril network on which clusters of octacalcium phosphate crystals nucleate and grow. By combining photolithography and ELD, we were also able to pattern the composite coating into regular arrays of squares. Preliminary results by nanoindentation tests showed that properly prepared composite coating may have higher elastic modulus and scratch resistance than monolithic porous calcium phosphate coating. The results not only provide a novel bioactive coating for biomedical implants, but also establish a new experimental protocol for studying biomineralization mechanisms of collagen based biological tissues.
由胶原蛋白和磷酸钙矿物质组成的复合涂层被认为具有生物活性,可能会促进骨生长以及金属骨科植入物的固定。在本研究中,我们通过电解沉积(ELD)在硅基底上成功开发出了一种均匀的胶原纤维/磷酸八钙复合涂层。涂层沉积是通过在一个三电极电化学池中对阴极施加恒定电位来完成的,该电化学池含有胶原分子、钙和磷酸根离子的弱酸性(pH 4.8 - 5.3)水溶液。涂层过程涉及胶原纤维的自组装以及由于阴极反应和局部pH值升高导致的磷酸钙矿物质的沉积。通过适当调整溶液和沉积参数,这两个步骤可以同步进行,以在纳米尺度上形成类似骨的复合材料。通过光学和荧光显微镜、扫描和透射电子显微镜、能量色散X射线分析、电感耦合氩等离子体发射光谱法以及傅里叶变换红外光谱法对涂层的形态、晶体结构和成分进行了分析。在典型的沉积条件下,阴极(硅)表面形成了一层薄(100纳米)的磷酸钙涂层,在其之上形成了一层厚(约100微米)的复合层。多孔复合层由胶原纤维网络组成,在该网络上磷酸八钙晶体簇成核并生长。通过结合光刻和ELD,我们还能够将复合涂层图案化为规则的正方形阵列。纳米压痕测试的初步结果表明,制备得当的复合涂层可能比整体多孔磷酸钙涂层具有更高的弹性模量和抗划伤性。这些结果不仅为生物医学植入物提供了一种新型生物活性涂层,还建立了一种研究基于胶原蛋白的生物组织生物矿化机制的新实验方案。