The effect of an adjustable sitting angle on the perceived discomfort from the back and neck-shoulder regions in building crane operators.

In a previous working environment study of building crane operators, it has been found that approximately 70% experienced discomfort from the locomotor system. Comments by the interviewed crane operators indicated that it is, among other things, the forward flexed sitting position during lifts close to the crane that causes discomfort. This investigation sought to apply knowledge from the forestry industry concerning the beneficial effects of improved operator's seats to the work situation of crane operators. On a construction site with three cranes, an operator's seat with adjustable sitting angle was installed in one of the cranes. Estimation of perceived strain-discomfort in the lumbar region of the back as well as in the neck-shoulder region was assessed according to Borg's scale. Data were collected from the crane operators seated in their ordinary operator's seat, seated in the test seat, and seated in another crane with an ordinary type of seat. The results showed that in [Formula: see text] of all lifts, the crane operator was sitting bent-forward with little opportunity for relief via a backrest or armrests. The highest estimated discomfort values in the study were also obtained in an ordinary operator's seat on days with a high proportion of lifts close to the crane. When working in the test seat, none of the subjects gave an estimate higher than 0.5 (discomfort equivalent to very, very weak). An adjustable operator's seat could be a good alternative to a fixed seat, and more tests would be desirable.