Mitra Rajib K, Paul Bidyut K
Geological Studies Unit, Indian Statistical Institute, 203 B.T. Road, Kolkata 700108, India.
J Colloid Interface Sci. 2005 Mar 15;283(2):565-77. doi: 10.1016/j.jcis.2004.09.015.
Microemulsification of a vegetable oil (eucalyptus) with single and mixed surfactants (AOT and Brij-35), cosurfactant of different lipophilicities (isomers of butanol), and water were studied at different surfactant and cosurfactant mixing ratios. The phase diagrams of the quaternary systems were constructed using unfolded and folded tetrahedron, wherein the phase characteristics of different ternary systems can be underlined. The microemulsion zone was found to be dependent upon the mixing ratios of surfactant and cosurfactant; the largest microemulsion zone was formed with 1:1 (w/w) S:CS. The effects of temperature and additives (NaCl, urea, glucose, and bile salts of different concentrations) on the phase behavior were examined. The mixed microemulsion system showed temperature insensitivity, whereas the Brij-35 (single) stabilized system exhibited a smaller microemulsion zone at elevated temperature. NaCl and glucose increased the microemulsion zone up to a certain concentration, beyond which the microemulsion zones were decreased. These additives decreased the microemulsion zones as temperature was increased. The effect of urea on microemulsion zone was found to be insignificant even at the concentration 3.0 mol dm(-3). Little effect on microemulsion zone was shown by NaC (sodium cholate) at 0.25 and 0.5 mol dm(-3) at different temperatures. The conductance of the single (AOT) and mixed microemulsion system (AOT+Brij-35) depends upon the water content and mixing ratios of the surfactants, and a steep rise in conductance was observed at equal weight percentages of oil and water. Viscosities for both single (AOT) and mixed (AOT+Brij-35) surfactant systems passed through maxima at equal oil and water regions showing structural transition. The viscosities for microemulsion systems increased with increasing Brij-35 content in the AOT+Brij-35 blend. Conductances and viscosities of different monophasic compositions in the absence and presence of additives (NaCl and NaC) were measured at different temperatures. The activation energy of conduction (DeltaE(cond)( *)) and the activation enthalpy for viscous flow (DeltaH(vis)( *)) were evaluated. It was found that both DeltaE(cond)( *) and DeltaH(vis)( *) were a function of the nature of the dispersion medium. Considering the phase separation point of maximum solubility, the free energy of dissolution of water or oil (DeltaG(s)(0)) at the microdispersed state in amphiphile medium was estimated and found to be a function of surfactant composition.
研究了植物油(桉树油)与单一表面活性剂和混合表面活性剂(AOT和Brij - 35)、不同亲脂性的助表面活性剂(丁醇异构体)以及水在不同表面活性剂和助表面活性剂混合比例下的微乳化情况。使用展开和折叠四面体构建了四元体系的相图,其中可以突出不同三元体系的相特征。发现微乳液区域取决于表面活性剂和助表面活性剂的混合比例;当表面活性剂与助表面活性剂的质量比为1:1时形成最大的微乳液区域。研究了温度和添加剂(不同浓度的NaCl、尿素、葡萄糖和胆盐)对相行为的影响。混合微乳液体系表现出对温度不敏感,而Brij - 35(单一)稳定的体系在高温下微乳液区域较小。NaCl和葡萄糖在一定浓度范围内增加微乳液区域,超过该浓度微乳液区域减小。随着温度升高,这些添加剂会减小微乳液区域。发现即使在3.0 mol dm⁻³的浓度下,尿素对微乳液区域的影响也不显著。在不同温度下,NaC(胆酸钠)在0.25和0.5 mol dm⁻³时对微乳液区域影响很小。单一(AOT)和混合微乳液体系(AOT + Brij - 35)的电导率取决于含水量和表面活性剂的混合比例,并且在油和水的重量百分比相等时观察到电导率急剧上升。单一(AOT)和混合(AOT + Brij - 35)表面活性剂体系的粘度在油和水区域相等时都通过最大值,显示出结构转变。微乳液体系的粘度随着AOT + Brij - 35混合物中Brij - 35含量的增加而增加。在有无添加剂(NaCl和NaC)的情况下,在不同温度下测量了不同单相组成的电导率和粘度。评估了传导的活化能(ΔE(cond)( *))和粘性流动的活化焓(ΔH(vis)( *))。发现ΔE(cond)( *)和ΔH(vis)( *)都是分散介质性质的函数。考虑到最大溶解度的相分离点,估计了水或油在两亲介质中微分散状态下的溶解自由能(ΔG(s)(0)),发现它是表面活性剂组成的函数。