Miklosová Mária, Miklos Vojtech
Department of Anatomy, Medical Faculty, University of P. I. Safarík, Kosice, Slovak Republic.
Biomed Pap Med Fac Univ Palacky Olomouc Czech Repub. 2004 Dec;148(2):237-8. doi: 10.5507/bp.2004.048.
Plastination is in some cases unsuccessful. The goal of this work was to monitor, to describe and to analyse the reasons of S10 plastination method failure. We prepared the silicone-impregnated specimens using the standard silicone method S 10. The causes of bad preparation are numerous. Usual defects produced during plastination process are the changes in the bulk, the changes in the colour and other visible defects (e.g. deformations, spots on the organs surface). The frequent reasons for these defects are: unsuitable temperature, using of old bad fixed formaldehyde specimens and too long gas-curing procedure. The knowledge of reasons of unsuccessful plastination is important condition for achievement the good results.
在某些情况下，塑化处理并不成功。这项工作的目的是监测、描述并分析S10塑化方法失败的原因。我们采用标准的S10硅树脂方法制备了硅树脂浸渍标本。制备效果不佳的原因有很多。在塑化过程中产生的常见缺陷包括体积变化、颜色变化以及其他可见缺陷（如变形、器官表面斑点）。这些缺陷的常见原因有：温度不合适、使用陈旧的甲醛固定不良标本以及气体固化过程过长。了解塑化失败的原因是取得良好效果的重要条件。
