Hubbard F Pierce, Santonicola Gabriella, Kaler Eric W, Abbott Nicholas L
Department of Chemical and Biological Engineering, University of Wisconsin-Madison, 1415 Engineering Drive, Madison, Wisconsin 53706-1691, USA.
Langmuir. 2005 Jul 5;21(14):6131-6. doi: 10.1021/la050263c.
This paper reports on the microstructures formed in aqueous solutions containing mixtures of sodium dodecyl sulfate (SDS) and a photosensitive, bolaform surfactant, bis(trimethylammoniumhexyloxy)azobenzene dibromide (BTHA). By using quasi-elastic light scattering and small-angle neutron scattering, we determined that aqueous solutions containing SDS and the trans isomer of BTHA (0.1 wt % total surfactant, 15 mol % BTHA, 85 mol % SDS) form vesicles with average hydrodynamic diameters of 1350 +/- 50 angstroms and bilayer thicknesses of 35 +/- 2 angstroms. The measured bilayer thickness is consistent with a model of the vesicle bilayer in which the trans isomer of BTHA spans the bilayer. Upon illumination with UV light, the BTHA underwent photoisomerization to produce a cis-rich photostationary state (80% cis isomer). We measured this photoisomerization to drive the reorganization of vesicles into cylindrical aggregates with cross-sectional radii of 19 +/- 3 angstroms and average hydrodynamic diameters of 240 +/- 50 angstroms. Equilibration of the cis-rich solution in the dark at 25 degrees C for 12 h or illumination of the solution with visible light leads to the recovery of the trans-rich photostationary state of the solution and the reformation of vesicles, thus demonstrating the potential utility of this system as the basis of a tunable fluid.
本文报道了在含有十二烷基硫酸钠(SDS)和一种光敏性 bola 型表面活性剂双(三甲基铵己氧基)偶氮苯二溴化物(BTHA)混合物的水溶液中形成的微观结构。通过使用准弹性光散射和小角中子散射,我们确定含有 SDS 和 BTHA 反式异构体(总表面活性剂 0.1 wt%,15 mol%BTHA,85 mol%SDS)的水溶液形成了平均流体动力学直径为 1350±50 埃且双层厚度为 35±2 埃的囊泡。所测量的双层厚度与 BTHA 反式异构体横跨双层的囊泡双层模型一致。在用紫外光照射时,BTHA 发生光异构化以产生富含顺式异构体的光稳态(80%顺式异构体)。我们测量到这种光异构化促使囊泡重新组织成横截面半径为 19±3 埃且平均流体动力学直径为 240±50 埃的圆柱形聚集体。将富含顺式异构体的溶液在 25℃黑暗中平衡 12 小时或用可见光照射该溶液会导致溶液恢复到富含反式异构体的光稳态并重新形成囊泡,从而证明了该系统作为可调谐流体基础的潜在实用性。