Zheng Y, Anderson J C, Suresh V, Grotberg J B
Department of Biomedical Engineering, University of Michigan, Ann Arbor, MI 48109, USA.
J Biomech Eng. 2005 Oct;127(5):798-806. doi: 10.1115/1.1992529.
Many medical therapies require liquid plugs to be instilled into and delivered throughout the pulmonary airways. Improving these treatments requires a better understanding of how liquid distributes throughout these airways. In this study, gravitational and surface mechanisms determining the distribution of instilled liquids are examined experimentally using a bench-top model of a symmetrically bifurcating airway. A liquid plug was instilled into the parent tube and driven through the bifurcation by a syringe pump. The effect of gravity was adjusted by changing the roll angle (phi) and pitch angle (gamma) of the bifurcation (phi = gamma =0 deg was isogravitational). Phi determines the relative gravitational orientation of the two daughter tubes: when phi not equal to 0 deg, one daughter tube was lower (gravitationally favored) compared to the other. Gamma determines the component of gravity acting along the axial direction of the parent tube: when gamma not equal to 0 deg, a nonzero component of gravity acts along the axial direction of the parent tube. A splitting ratio Rs, is defined as the ratio of the liquid volume in the upper daughter to the lower just after plug splitting. We measured the splitting ratio, Rs, as a function of: the parent-tube capillary number (Cap); the Bond number (Bo); phi; gamma; and the presence of pre-existing plugs initially blocking either daughter tube. A critical capillary number (Cac) was found to exist below which no liquid entered the upper daughter (Rs = 0), and above which Rs increased and leveled off with Cap. Cac increased while Rs decreased with increasing phi, gamma, and Bo for blocked and unblocked cases at a given Cap > Ca,. Compared to the nonblockage cases, Rs decreased (increased) at a given Cap while Cac increased (decreased) with an upper (lower) liquid blockage. More liquid entered the unblocked daughter with a blockage in one daughter tube, and this effect was larger with larger gravity effect. A simple theoretical model that predicts Rs and Cac is in qualitative agreement with the experiments over a wide range of parameters.
许多医学治疗方法需要将液体栓塞注入并输送到整个肺气道。改进这些治疗方法需要更好地了解液体在这些气道中的分布情况。在本研究中,使用对称分叉气道的台式模型,通过实验研究了决定注入液体分布的重力和表面机制。将一个液体栓塞注入母管,并由注射泵驱动通过分叉处。通过改变分叉处的滚转角(φ)和俯仰角(γ)来调节重力的影响(φ = γ = 0°为等重力状态)。φ决定了两个子管的相对重力方向:当φ≠0°时,一个子管比另一个子管更低(受重力影响更大)。γ决定了沿母管轴向作用的重力分量:当γ≠0°时,重力的非零分量沿母管轴向作用。分流比Rs定义为栓塞分裂后上侧子管中液体体积与下侧子管中液体体积之比。我们测量了分流比Rs作为以下因素的函数:母管毛细管数(Cap);邦德数(Bo);φ;γ;以及初始时堵塞任一子管的既有栓塞的存在情况。发现存在一个临界毛细管数(Cac),低于该值时没有液体进入上侧子管(Rs = 0),高于该值时Rs随Cap增加并趋于平稳。在给定Cap > Ca的情况下,对于堵塞和未堵塞的情况,随着φ、γ和Bo的增加,Cac增加而Rs减小。与无堵塞情况相比,在给定Cap时,当上侧(下侧)存在液体堵塞时,Rs减小(增加)而Cac增加(减小)。当一个子管堵塞时,更多的液体进入未堵塞的子管,并且这种效应在重力效应更大时更明显。一个预测Rs和Cac的简单理论模型在广泛的参数范围内与实验结果定性一致。