Taheri Saeid, Sood Rohit
University of New Mexico BRaIN center, Albuquerque, NM 87131, USA.
Magn Reson Imaging. 2006 Jan;24(1):51-9. doi: 10.1016/j.mri.2005.10.020. Epub 2005 Dec 20.
Image contrast between tissue types can be generated based on their T1/T2 ratio using spin-lock MRI techniques. An interesting application of such a concept would be to generate contrast in tissue with tissue relaxation times modified using exogenous contrast agents. An amplitude-modulated adiabatic waveform has been shown in the past to perform spin-lock MRI. However, implementation of this waveform may not prove to be efficient and practical in research or a clinical setup due to high radiofrequency power deposition. Recent advancement in software and hardware MR technology allows implementation of amplitude- and phase-modulated adiabatic waveforms on MR systems. The aim of this work was to explore role of adiabatic waveforms in performing rho imaging and demonstrate that amplitude- and phase-modulated waveforms [e.g., hyperbolic secant, B1 independent rotation-4 (BIR-4) waveforms] can be used to distinguish materials that differ in T1/T2 ratio.
MR simulation was performed using computer routines implemented in MATLAB environment (Mathworks, Natick, MA). Modified Bloch equations with trapezoidal, hyperbolic secant and BIR-4 waveforms were used to perform MR simulation. Trapezoidal waveforms were only used for comparison to other waveforms. Gadolinium DTPA (Gad-DTPA) (T1/T2 approximately 1) and manganese chloride (MnCl(2)) (T1/T2 approximately 10) were used as examples of contrast agents due to their routine use in clinical and research setups and more importantly because they provide good examples of materials differing in T1/T2 ratios. Results of spin locking using trapezoidal waveform agree very well with the previously published results, thereby validating the computer routines used in this MR simulation. Plots of M(rho) (magnetization vector in rho domain) vs. offset frequency show distinct curves for these materials differing in T1/T2 for the three waveforms. BIR-4 waveform demonstrated a 40% difference in M(rho) ( approximately 150 Hz) for the materials. Rate of spin lock with hyperbolic secant waveform was rapid compared to other waveforms.
MR simulation using contrast agents Gad-DTPA and MnCl(2) provided a useful way to demonstrate that amplitude- and phase-modulated adiabatic waveforms can be used to perform spin-lock imaging. Future work involves implementation of these waveforms on MR scanners and performing in vivo imaging to generate tissue contrast based on relaxation times ratio.
利用自旋锁定磁共振成像(MRI)技术,可基于组织类型的T1/T2比值生成图像对比度。这种概念的一个有趣应用是,在使用外源性造影剂改变组织弛豫时间的情况下,在组织中产生对比度。过去已证明,调幅绝热波形可用于执行自旋锁定MRI。然而,由于高射频功率沉积,在研究或临床环境中,这种波形的实施可能并不高效且不实用。软件和硬件MR技术的最新进展使得在MR系统上能够实现调幅和调相绝热波形。这项工作的目的是探索绝热波形在执行ρ成像中的作用,并证明调幅和调相波形[例如,双曲正割、B1独立旋转-4(BIR-4)波形]可用于区分T1/T2比值不同的材料。
使用MATLAB环境(Mathworks,马萨诸塞州纳蒂克)中实现的计算机程序进行MR模拟。使用带有梯形、双曲正割和BIR-4波形的修正布洛赫方程进行MR模拟。梯形波形仅用于与其他波形进行比较。钆喷酸葡胺(Gad-DTPA)(T1/T2约为1)和氯化锰(MnCl₂)(T1/T2约为10)被用作造影剂示例,这是因为它们在临床和研究环境中常规使用,更重要的是,它们提供了T1/T2比值不同的材料的良好示例。使用梯形波形进行自旋锁定的结果与先前发表的结果非常吻合,从而验证了本MR模拟中使用的计算机程序。对于这三种波形,M(ρ)(ρ域中的磁化矢量)与偏移频率的关系图显示,这些T1/T2不同的材料呈现出明显不同的曲线。对于这些材料,BIR-4波形在M(ρ)上表现出40%的差异(约150 Hz)。与其他波形相比,双曲正割波形的自旋锁定速率较快。
使用造影剂Gad-DTPA和MnCl₂进行的MR模拟提供了一种有用的方法,可证明调幅和调相绝热波形可用于执行自旋锁定成像。未来的工作包括在MR扫描仪上实现这些波形,并进行体内成像,以基于弛豫时间比值生成组织对比度。