Fürstner Alois, Hannen Peter
Max-Planck-Institut für Kohlenforschung, 45470 Mülheim/Ruhr, Germany.
Chemistry. 2006 Apr 3;12(11):3006-19. doi: 10.1002/chem.200501299.
Propargyl acetates, in the presence of catalytic amounts of late transition-metal salts such as PtCl(2) or AuCl(3), represent synthetic equivalents of alpha-diazoketones. This notion is corroborated by a concise approach to various sesquiterpene natural products starting from readily available substrates. Specifically, (+)-carvomenthone (17) is converted into propargyl acetate (S)-26 by a sequence involving Stille cross-coupling of its kinetic enol triflate 18, regioselective hydroboration/oxidation of the resulting 1,3-diene 19, and addition of an alkynyl cerium reagent to aldehyde 21 thus obtained. Since the latter step was found to be unselective, the configuration of the reacting propargyl acetate was unambiguously set by oxidation followed by diastereoselective transfer hydrogenation by using Noyori's catalyst 25. Compound (S)-26, on treatment with PtCl(2) in toluene, converted exclusively to the tricyclic enol acetate 27, which was saponified to give norcubebone 11 in excellent overall yield. The conversion of this compound into the sesquiterpene alcohol (-)-cubebol (6) was best achieved with MeCeCl(2) as the nucleophile, whereas the formation of the parent hydrocarbon (-)-alpha-cubebene (4) was effected in excellent yield by recourse to iron-catalyzed cross coupling methodology developed in this laboratory. Since norketone 11 has previously been transformed into (-)-beta-cubebene (5) as well as (-)-4-epicubebol 8, our approach constitutes formal total syntheses of these additional natural products as well. Along similar lines, the readily available propargyl acetates 1, 33 and 47 were shown to give access to 2-carene 44, sesquicarene 39, and episesquicarene 51 in excellent overall yields. In this series, however, the cycloisomerization reaction was best achieved with catalytic amounts of AuCl(3) in 1,2-dichloroethane as the solvent. In addition to these preparative results, our data provide some insight into the mechanism of these remarkable skeletal rearrangement reactions. Transformations of this type are likely triggered by initial coordination of the alkyne unit of the substrate to the carbophilic transition-metal cation. Formal attack of the alkene moiety onto the resulting pi-complex engenders the formation of an electrophilic cyclopropyl carbene species which subsequently reacts with the adjacent acetate unit to give the final product. The alternative phasing of events, implying initial attack of the acetate (rather than the alkene moiety) onto the metal-alkyne complex, is inconsistent with the stereochemical data obtained during this total synthesis campaign.
在催化量的晚期过渡金属盐(如PtCl₂或AuCl₃)存在下,炔丙基乙酸酯代表α-重氮酮的合成等效物。从容易获得的底物开始,通过简洁的方法合成各种倍半萜天然产物,证实了这一观点。具体而言,(+)-香芹酮(17)通过一系列反应转化为炔丙基乙酸酯(S)-26,该系列反应包括其动力学烯醇三氟甲磺酸酯18的Stille交叉偶联、所得1,3-二烯19的区域选择性硼氢化/氧化,以及将炔基铈试剂加成到由此得到的醛21上。由于发现后一步反应没有选择性,通过氧化,然后使用Noyori催化剂25进行非对映选择性转移氢化,明确确定了反应的炔丙基乙酸酯的构型。化合物(S)-26在甲苯中用PtCl₂处理,仅转化为三环烯醇乙酸酯27,将其皂化以优异的总收率得到降荜澄茄烯11。以MeCeCl₂作为亲核试剂,能最好地将该化合物转化为倍半萜醇(-)-荜澄茄醇(6),而通过采用本实验室开发的铁催化交叉偶联方法,能以优异的收率生成母体烃(-)-α-荜澄茄烯(4)。由于之前降酮11已被转化为(-)-β-荜澄茄烯(5)以及(-)-4-表荜澄茄醇8,我们的方法也构成了这些其他天然产物的形式全合成。同样,容易获得的炔丙基乙酸酯1、33和47能以优异的总收率得到2-蒈烯44、倍半蒈烯39和表倍半蒈烯51。然而,在该系列中,以1,2-二氯乙烷为溶剂,用催化量的AuCl₃能最好地实现环异构化反应。除了这些制备结果外,我们的数据还为这些显著的骨架重排反应的机理提供了一些见解。这类转化可能是由底物的炔单元与亲碳过渡金属阳离子的初始配位引发的。烯烃部分对所得π-配合物的形式进攻导致形成亲电环丙基卡宾物种,该物种随后与相邻的乙酸酯单元反应生成最终产物。另一种反应顺序,即暗示乙酸酯(而不是烯烃部分)对金属-炔配合物的初始进攻,与在这次全合成过程中获得的立体化学数据不一致。