González-Méijome José M, López-Alemany Antonio, Lira Madalena, Almeida José B, Oliveira M Elisabete C D Real, Parafita Manuel A
Department of Physics (Optometry), School of Sciences, University of Minho, Braga, Portugal.
J Biomed Mater Res B Appl Biomater. 2007 Jan;80(1):184-91. doi: 10.1002/jbm.b.30583.
The purpose of the present study was to develop mathematical relationships that allow obtaining equilibrium water content and refractive index of conventional and silicone hydrogel soft contact lenses from refractive index measures obtained with automated refractometry or equilibrium water content measures derived from manual refractometry, respectively.
Twelve HEMA-based hydrogels of different hydration and four siloxane-based polymers were assayed. A manual refractometer and a digital refractometer were used. Polynomial models obtained from the sucrose curves of equilibrium water content against refractive index and vice-versa were used either considering the whole range of sucrose concentrations (16-100% equilibrium water content) or a range confined to the equilibrium water content of current soft contact lenses (approximately 20-80% equilibrium water content).
Values of equilibrium water content measured with the Atago N-2E and those derived from the refractive index measurement with CLR 12-70 by the applications of sucrose-based models displayed a strong linear correlation (r2 = 0.978). The same correlations were obtained when the models are applied to obtain refractive index values from the Atago N-2E and compared with those (values) given by the CLR 12-70 (r2 = 0.978). No significantly different results are obtained between models derived from the whole range of the sucrose solution or the model limited to the normal range of soft contact lens hydration.
Present results will have implications for future experimental and clinical research regarding normal hydration and dehydration experiments with hydrogel polymers, and particularly in the field of contact lenses.
本研究的目的是建立数学关系,以便分别从自动折射仪获得的折射率测量值或手动折射仪得出的平衡含水量测量值中,获取传统型和硅水凝胶软性接触镜的平衡含水量和折射率。
对12种不同水合程度的基于甲基丙烯酸羟乙酯(HEMA)的水凝胶和4种基于硅氧烷的聚合物进行了测定。使用了手动折射仪和数字折射仪。根据平衡含水量与折射率的蔗糖曲线获得的多项式模型,无论是考虑蔗糖浓度的整个范围(平衡含水量为16 - 100%),还是局限于当前软性接触镜平衡含水量的范围(约20 - 80%平衡含水量),都被使用。
用爱拓N - 2E测量的平衡含水量值与通过基于蔗糖的模型应用CLR 12 - 70的折射率测量得出的值显示出很强的线性相关性(r2 = 0.978)。当应用这些模型从爱拓N - 2E获得折射率值并与CLR 12 - 70给出的值进行比较时,也得到了相同的相关性(r2 = 0.978)。从蔗糖溶液的整个范围得出的模型与局限于软性接触镜正常水合范围的模型之间,未获得显著不同的结果。
目前的结果将对未来关于水凝胶聚合物正常水合和脱水实验的实验及临床研究产生影响,尤其是在隐形眼镜领域。