Wang Gou-Jen, Peng Chi-Sheng
Department of Mechanical Engineering, Center of Nanoscience and Nanotechnology, National Chung-Hsing University, Taichung, Taiwan.
J Nanosci Nanotechnol. 2006 Apr;6(4):1004-8. doi: 10.1166/jnn.2006.148.
A novel, much simpler, and low-cost method to fabricate the porous pattern of the anodic aluminum oxide (AAO) based on the aluminum foils laminate approach was carried out. During our experiments, it was found that the pores of the AAO on the upper foil grew bi-directionally from both the top and the bottom surfaces. Experimental results further indicate that the upward porous pattern of the upper foil is determined by the surface structure of the bottom surface of the upper foil. The porous pattern of AAO can be controlled by a pre-made pattern on the bottom surface. Furthermore, no Aluminum (Al) layer removing process is required in this novel laminate method.
基于铝箔层压方法，开展了一种新颖、简单且低成本的制备阳极氧化铝（AAO）多孔图案的方法。在我们的实验过程中，发现上层箔片上的AAO孔从顶面和底面双向生长。实验结果进一步表明，上层箔片向上的多孔图案由上层箔片底面的表面结构决定。AAO的多孔图案可通过底面的预制图案来控制。此外，在这种新颖的层压方法中不需要去除铝（Al）层的工艺。
