Lin Hsien-Yang, Ma Chien-Ching
Department of Mechanical Engineering, De Lin Institute of Technology, Tucheng, Taiwan 23646, Republic of China.
IEEE Trans Ultrason Ferroelectr Freq Control. 2006 May;53(5):825-37. doi: 10.1109/tuffc.2006.1632673.
In this paper, the resonant vibrations of square piezoceramic plates with four different electrode designs are investigated. Two experimental techniques, the amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and the impedance analysis, are used to access the influence of the electrode arrangement on the resonant characteristics of square piezoceramic plates. Both the out-of-plane and in-plane resonant frequencies and full-field mode shapes of piezoceramic plates with various electrode designs are obtained from the AF-ESPI method. The impedance analyzer is used to measure the resonant and antiresonant frequencies of piezoceramic plates. The dynamic electromechanical coupling coefficient (EMCC), which relates to the ability of conversion between mechanical and electrical energy, is determined from the measured values of resonant and antiresonant frequencies. Experimental results of the resonant vibration characteristics of the square piezoceramic plates are verified by numerical computations based on the finite-element method. Excellent agreement between the experimental and numerical results is found in resonant frequencies and corresponding mode shapes. It is found that the electrode design has important influence on the resonant characteristics of piezoceramic plates. The effect of different designs of electrode is more significant in the in-plane modes than that in the out-of-plane modes.
