Suppr超能文献

用于大鼠吸入研究的沥青烟雾的收集、验证和生成 第2部分:从储存罐中收集沥青烟雾

Collection, validation and generation of bitumen fumes for inhalation studies in rats Part 2: Collection of bitumen fumes from storage tanks.

作者信息

Pohlmann G, Preiss A, Levsen K, Raabe M, Koch W

机构信息

Fraunhofer Institute Toxikology und Experimental Medicine (Fh-ITEM) Nikolai-Fuchs-Strasse 1, 30625 Hannover, Germany.

出版信息

Ann Occup Hyg. 2006 Nov;50(8):805-12. doi: 10.1093/annhyg/mel048. Epub 2006 Jul 20.

Abstract

OBJECTIVES

The objective of the study described in this and an accompanying series of papers was to develop a laboratory generated exposure atmosphere to be used for chronic inhalation toxicity studies in rats that resembles, as closely as possible, personal exposures seen by workers during road paving operations.

METHODS

To achieve this objective, atmospheric workplace samples were collected at road paving worksites and compared analytically with bitumen fume samples collected from the headspace of hot bitumen storage tanks. In Preiss et al. (2006) the collection and analysis of workplaces samples is described. This contribution describes the strategy for the in-line extraction of a suitable fraction of bitumen fume collected from the headspace of a bitumen storage tank and the comparison of the collected condensate to workplace samples.

RESULTS

Results show that is possible to develop a collecting procedure that allows sampling from hot bitumen storage tanks in an operational asphalt mixing plant. The sampling procedure has been optimized to collect material that matches the workplace samples as closely as possible. The comparison to workplace samples has been performed using parameters that can be analyzed in both the workplace samples and the bitumen fume condensate collected from the tanks. Boiling point distribution (BPD), UV fluorescence (UV-Fl) and content of individual polycyclic aromatic hydrocarbons (PAH) were selected as parameters. The BPD of the final collected bitumen fume condensate did not differ by more than 17 degrees C from any point on the average BPD curve of the workplace samples, in the range from 5 to 95%. UV-Fl of the bitumen fume condensate nearly exactly matched the average UV-Fl of the workplace samples. However, the sum of the 17 PAHs analyzed in the test samples, compared to the mass of the condensate, is lower by a factor of approximately 3 than the sum of the 17 PAHs in some personal samples compared to the mass of Total Organic Matter (TOM). It has to be recognised that during the collection of the workplace samples, despite all efforts a number of the workers who carried a personal sampler could not be prevented from smoking.

摘要

目的

本研究及一系列相关论文中所描述的研究目的是建立一种实验室生成的暴露环境,用于大鼠慢性吸入毒性研究,该环境要尽可能接近铺路作业工人所经历的个人暴露情况。

方法

为实现这一目标,在铺路施工现场采集大气工作场所样本,并与从热沥青储存罐顶部空间采集的沥青烟样本进行分析比较。在普赖斯等人(2006年)的论文中描述了工作场所样本的采集和分析过程。本论文描述了从沥青储存罐顶部空间采集的合适比例沥青烟的在线萃取策略,以及将采集的冷凝物与工作场所样本进行比较的过程。

结果

结果表明,有可能制定一种采集程序,以便从运行中的沥青搅拌厂的热沥青储存罐中进行采样。采样程序已得到优化,以收集与工作场所样本尽可能匹配的物质。已使用可在工作场所样本和从储存罐收集的沥青烟冷凝物中进行分析的参数,将其与工作场所样本进行比较。选择沸点分布(BPD)、紫外荧光(UV-Fl)和个别多环芳烃(PAH)的含量作为参数。最终采集的沥青烟冷凝物的BPD与工作场所样本平均BPD曲线在5%至95%范围内的任何一点相比,相差不超过17摄氏度。沥青烟冷凝物的UV-Fl几乎与工作场所样本的平均UV-Fl完全匹配。然而,与冷凝物质量相比,测试样本中分析的17种PAHs的总和,与某些个人样本中17种PAHs与总有机物(TOM)质量相比的总和相比,大约低3倍。必须认识到,在采集工作场所样本期间,尽管已尽一切努力,但仍无法阻止一些携带个人采样器的工人吸烟。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验