The effects of interimplant distances on papilla formation and crestal resorption in implants with a morse cone connection and a platform switch: a histomorphometric study in dogs.

BACKGROUND

Implant esthetics have been the focus of attention for the last few years, and one of the most important points is the effect that interimplant distances can have on papilla formation and bone loss. The aim of this study was to evaluate the effect that distances of 1, 2, and 3 mm between implants after prosthetic restoration will have on crestal bone resorption (from the top of the implant to the bone crest [TI-BC]) and bone resorption (from the top of the implant to the first bone-to-implant contact TI-BIC) in two-stage implants used in a submerged and non-submerged protocol.

METHODS

The mandibular bilateral premolars of seven dogs were extracted, and after 12 weeks, each dog received eight implants. The implants were placed so that three interimplant contact points were created, with 1-mm (group 1), 2-mm (group 2), and 3-mm (group 3) distances constructed on each side. The sides and the position of the groups were randomly selected. After 12 weeks, the implants received metallic prostheses with 5 mm between the contact point and the bone crest. After 8 weeks more, the animals were sacrificed.

RESULTS

The TI-BC was 0.20 and 0.18 mm for group 1, 0.15 and 0.14 mm for group 2, and 0.15 and 0.15 mm for group 3 for non-submerged and submerged implants, respectively. At the proximal region, the TI-BC was 0.16 mm for non-submerged and 0.16 mm for submerged implants. The TI-BIC was 0.32 and 0.30 mm for group 1, 0.19 and 0.21 mm for group 2, and 0.30 and 0.24 mm for group 3 for non-submerged and submerged implants, respectively. At the proximal region, the TI-BIC was 0.26 mm for non-submerged and 0.25 mm for submerged implants. There was no statistical difference for any of the parameters (analysis of variance [ANOVA]).

CONCLUSION

Distances of 1, 2, and 3 mm between implants do not result in statistically significant differences on TI-BC and TI-BIC around submerged or non-submerged implants with a Morse cone connection and a platform switch.