Blanpied P, Smidt G L
Program in Physical Therapy, University of Rhode Island, Kingston 02882.
J Biomech. 1992 Jan;25(1):29-39. doi: 10.1016/0021-9290(92)90243-t.
The purpose of this investigation was to determine the influence of different stretch velocities, different rates of pre-stretch force development, and different pre-stretch muscle lengths on the intrinsic stiffness exhibited by the quasi-statically contracting active human plantarflexors during multiple single-stretch trials at 20-60% of maximum isometric contraction. Subjects were positioned prone, with the knee flexed 1.57 rad(90 degrees), shank stabilized, and foot secured in a hard plastic orthotic. Slowly increasing isometric plantarflexion force was produced until the plantarflexors were stretched by a rapid 0.2 rad (12 degrees) dorsiflexion movement. Plantarflexion forces and ankle positions were determined during these stretches as well as during resting stretches when the muscle was inactive. Resting forces were subtracted from the active trials, forces converted to torques, and stiffnesses determined for the first 62 ms of the stretch. The slope of the stiffness vs pre-stretch torque relationship averaged 4.30 +/- 0.34 Nm rad-1 Nm-1. Little difference was found between stiffness determined through the single-stretch method and the results of previous studies employing different mechanical inputs. Differences in stiffnesses with different stretching velocities were caused by computational artifact rather than by differences in intrinsic muscular reaction. Faster rates of pre-stretch force increase prior to the stretch resulted in slightly lower stiffnesses. Different pre-stretch muscle lengths apparently did not result in different stiffnesses. The shape of the torque vs displacement curve was remarkably insensitive to the planned manipulations of the testing conditions, responding in a stereotypical manner.
本研究的目的是确定在最大等长收缩的20%-60%进行多次单拉伸试验时,不同的拉伸速度、预拉伸力发展速率以及不同的预拉伸肌肉长度,对准静态收缩的主动人体跖屈肌所表现出的固有刚度的影响。受试者俯卧位,膝关节屈曲1.57弧度(90度),小腿固定,足部固定在硬塑料矫形器中。缓慢增加等长跖屈力,直到跖屈肌通过快速0.2弧度(12度)的背屈运动被拉伸。在这些拉伸过程中以及肌肉不活动时的静息拉伸过程中,测定跖屈力和踝关节位置。从主动试验中减去静息力,将力转换为扭矩,并确定拉伸开始的62毫秒内的刚度。刚度与预拉伸扭矩关系的斜率平均为4.30±0.34牛米/弧度/牛米。通过单拉伸方法测定的刚度与先前采用不同机械输入的研究结果之间几乎没有差异。不同拉伸速度下刚度的差异是由计算误差引起的,而不是由固有肌肉反应的差异引起的。拉伸前预拉伸力增加的速度越快,刚度略低。不同的预拉伸肌肉长度显然不会导致不同的刚度。扭矩与位移曲线的形状对测试条件的计划操作明显不敏感,以一种刻板的方式响应。