Availability of radium isotopes and heavy metals from scales and tailings of Polish hard coal mining.

Radium and heavy metal contaminated tailings and scales resulting from Polish hard coal mining were investigated for their mobilisation potential by using leaching methods. The main focus is set on a three-step extraction procedure proposed by BCR (Bureau Communautaire de Référence, now Standards Measurements and Testing Programme) of the European Union, which was used for investigating the availability of radium isotopes. In addition, the results of a Polish extraction procedure for the heavy metals' water solubility are presented for rough comparison. After a special treatment, the BCR-reagents were measured by gamma-spectrometry to define their radium activity concentrations; the heavy metal content in the water soluble fractions was determined by ICP-AES. The samples were collected at two different sites influenced by the discharge of pit water from hard coal mining. The tailings were taken from a former tailing pond, which now is no longer in use, but the settled material is still present. At another abandoned and meanwhile flooded tailing pond, the scales were scraped from the inside of a discharge tube. The results obtained show that there is different leaching behaviour between the radium isotopes. The tailings being characterised by surface adsorbed radium provide up to 25% of the initial (226)Ra content, (228)Ra is altogether leached up to 15%. The scales comprise stable radiobaryte (Ba[Ra]SO(4)) and can be considered as being unable to provide radium isotopes, since no trace of radium dissolution was observed. The leaching behaviour of heavy metals is similar to that of radium. Mn, Ni and Zn are dissolved by water from the tailings; the scales do not provide any.