Chan B P, Hui T Y, Chan O C M, So K-F, Lu W, Cheung K M C, Salomatina E, Yaroslavsky A
Medical Engineering Program, Department of Mechanical Engineering, University of Hong Kong, Hong Kong Special Administrative Region, China, and Wellman Center for Photomedicine, Massachusetts General Hospital, Boston, USA.
Tissue Eng. 2007 Jan;13(1):73-85. doi: 10.1089/ten.2006.0004.
Collagen presents an attractive biomaterial for tissue engineering because of its excellent biocompatibility and negligible immunogenicity. However, some intrinsic features related to the mechanical stability and thrombogenicity limit its applications in orthopedic and vascular tissue engineering. Photochemical cross-linking is an emerging technique able to stabilize tissue grafts and improve the physicochemical properties of collagen-based structures. However, other important properties of collagen-based structures and the effect of processing parameters on these properties have not been explored. In this study, we aim to investigate the dose dependence of tensile and swelling properties on two parameters, namely, laser energy fluence and rose Bengal photosensitizer concentration. We also study the compression properties using cyclic compression test, long-term stability using subcutaneous implantation, and hematocompatibility using platelets adhesion test, of cross-linked collagen structures. Moreover, because limited optical penetration in turbid media is the major obstacle for light-based techniques, we also characterize the optical properties, which partially determine the effective optical penetration depth in collagen gel samples, during photochemical cross-linking. Laser energy fluence and rose Bengal concentration are important parameters affecting the cross-linking efficiency, which was characterized as the mechanical and the swelling properties, in a dose-dependent manner. Under the experimental conditions in this study, the peak fluence was 12.5 J/cm2 and the minimal rose Bengal concentration for effective cross-linking was >0.00008% (0.786 micromol). Photochemical cross-linking also enhanced the compression strength and long-term stability of collagen structures without compromising the tissue compatibility. Furthermore, photochemical cross-linking reduced platelet adhesion and abolished fibrin mesh formation, thereby improving the hematocompatibility of collagen structures. These results suggest the feasibility of using the photochemically cross-linked collagen structures for orthopedic and vascular tissue engineering. Finally, the effective optical penetration depth in collagen gel samples is wavelength and rose Bengal concentration dependent, and was approximately 12 mm at 514 nm at 0.001% (9.825 micromol), the rose Bengal concentration mostly used in this study.
胶原蛋白因其出色的生物相容性和可忽略不计的免疫原性,成为组织工程中颇具吸引力的生物材料。然而,一些与机械稳定性和血栓形成性相关的固有特性限制了其在骨科和血管组织工程中的应用。光化学交联是一种新兴技术,能够稳定组织移植物并改善基于胶原蛋白结构的物理化学性质。然而,基于胶原蛋白结构的其他重要特性以及加工参数对这些特性的影响尚未得到探索。在本研究中,我们旨在研究拉伸和溶胀性能对两个参数的剂量依赖性,这两个参数分别是激光能量通量和孟加拉玫瑰红光敏剂浓度。我们还使用循环压缩试验研究交联胶原蛋白结构的压缩性能,通过皮下植入研究其长期稳定性,并通过血小板黏附试验研究其血液相容性。此外,由于在浑浊介质中有限的光穿透是基于光的技术的主要障碍,我们还在光化学交联过程中表征了光学性质,这些性质部分决定了胶原蛋白凝胶样品中的有效光穿透深度。激光能量通量和孟加拉玫瑰红浓度是影响交联效率的重要参数,交联效率以剂量依赖的方式表现为机械性能和溶胀性能。在本研究的实验条件下,峰值通量为12.5 J/cm2,有效交联所需的最低孟加拉玫瑰红浓度>0.00008%(0.786微摩尔)。光化学交联还增强了胶原蛋白结构的抗压强度和长期稳定性,同时不损害组织相容性。此外,光化学交联减少了血小板黏附并消除了纤维蛋白网的形成,从而改善了胶原蛋白结构的血液相容性。这些结果表明将光化学交联的胶原蛋白结构用于骨科和血管组织工程的可行性。最后,胶原蛋白凝胶样品中的有效光穿透深度取决于波长和孟加拉玫瑰红浓度,在本研究中最常用的孟加拉玫瑰红浓度为0.001%(9.825微摩尔)时,在514 nm处约为12mm。