Suppr超能文献

从使用高频超声监测的渗透肿胀行为中提取关节软骨的力学性能。

Extraction of mechanical properties of articular cartilage from osmotic swelling behavior monitored using high frequency ultrasound.

作者信息

Wang Q, Zheng Y P, Niu H J, Mak A F T

机构信息

Department of Health Technology and Informatics, The Hong Kong Polytechnic University, Hong Kong, China.

出版信息

J Biomech Eng. 2007 Jun;129(3):413-22. doi: 10.1115/1.2720919.

Abstract

Articular cartilage is a biological weight-bearing tissue covering the bony ends of articulating joints. Negatively charged proteoglycan (PG) in articular cartilage is one of the main factors that govern its compressive mechanical behavior and swelling phenomenon. PG is nonuniformly distributed throughout the depth direction, and its amount or distribution may change in the degenerated articular cartilage such as osteoarthritis. In this paper, we used a 50 MHz ultrasound system to study the depth-dependent strain of articular cartilage under the osmotic loading induced by the decrease of the bathing saline concentration. The swelling-induced strains under the osmotic loading were used to determine the layered material properties of articular cartilage based on a triphasic model of the free-swelling. Fourteen cylindrical cartilage-bone samples prepared from fresh normal bovine patellae were tested in situ in this study. A layered triphasic model was proposed to describe the depth distribution of the swelling strain for the cartilage and to determine its aggregate modulus H(a) at two different layers, within which H(a) was assumed to be linearly dependent on the depth. The results showed that H(a) was 3.0+/-3.2, 7.0+/-7.4, 24.5+/-11.1 MPa at the cartilage surface, layer interface, and deep region, respectively. They are significantly different (p<0.01). The layer interface located at 70%+/-20% of the overall thickness from the uncalcified-calcified cartilage interface. Parametric analysis demonstrated that the depth-dependent distribution of the water fraction had a significant effect on the modeling results but not the fixed charge density. This study showed that high-frequency ultrasound measurement together with triphasic modeling is practical for quantifying the layered mechanical properties of articular cartilage nondestructively and has the potential for providing useful information for the detection of the early signs of osteoarthritis.

摘要

关节软骨是覆盖在关节骨端的一种生物承重组织。关节软骨中带负电荷的蛋白聚糖(PG)是决定其压缩力学行为和肿胀现象的主要因素之一。PG在整个深度方向上分布不均匀,在诸如骨关节炎等退变的关节软骨中,其数量或分布可能会发生变化。在本文中,我们使用50兆赫的超声系统来研究在因灌注生理盐水浓度降低而引起的渗透负荷下关节软骨的深度依赖性应变。基于自由肿胀的三相模型,利用渗透负荷下的肿胀诱导应变来确定关节软骨的分层材料特性。本研究对从新鲜正常牛髌骨制备的14个圆柱形软骨-骨样本进行了原位测试。提出了一个分层三相模型来描述软骨肿胀应变的深度分布,并确定其在两个不同层的聚集模量H(a),其中假设H(a)与深度呈线性相关。结果表明,在软骨表面、层界面和深部区域,H(a)分别为3.0±3.2、7.0±7.4、24.5±11.1兆帕。它们有显著差异(p<0.01)。层界面位于从非钙化-钙化软骨界面起总厚度的70%±20%处。参数分析表明,水分数的深度依赖性分布对建模结果有显著影响,但对固定电荷密度没有影响。本研究表明,高频超声测量结合三相建模对于无损量化关节软骨的分层力学特性是切实可行的,并且有可能为骨关节炎早期迹象的检测提供有用信息。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验