A new reliable method for dimethyl sulfoxide analysis in wastewater: dimethyl sulfoxide in Philadelphia's three water pollution control plants.

A simple but reliable procedure was developed to analyze dimethyl sulfoxide (DMSO) in wastewater. The isotope DMSO_d6 was used as the internal standard to ensure accuracy. The DMSO was reduced with stannous chloride and measured as dimethyl sulfide (DMS) with purge-and-trap gas chromatography/mass spectrometry. The method detection limit was at the sub-microgram-per-milliliter level; precision, as measured by standard deviation, was better than +/- 0.5%; and the recoveries were between 95 and 105% at the level of 2 microg/mL. The procedure could use standard analytical instrumentation used for volatile organic compound analysis. A field study was conducted to validate the method and quantify DMSO concentration range in the three water pollution control plants (WPCPs) in the city of Philadelphia, Pennsylvania. Results showed that, when a local chemical facility discharged, DMSO concentration could be as high as 12 mg/L in the influent to a WPCP. This would lead to the formation of a toxic "canned corn" DMS odor during the treatment processes.