Lee Kuo-Hoong, Su Yuan-Deng, Chen Shean-Jen, Tseng Fan-Gang, Lee Gwo-Bin
Department of Engineering Science, National Cheng Kung University, Taiwan.
Biosens Bioelectron. 2007 Nov 30;23(4):466-72. doi: 10.1016/j.bios.2007.05.007. Epub 2007 Jun 2.
This study reports a microfluidic chip integrated with an arrayed immunoassay for surface plasmon resonance (SPR) phase imaging of specific bio-samples. The SPR phase imaging system uses a surface-sensitive optical technique to detect two-dimensional (2D) spatial phase variation caused by rabbit immunoglobulin G (IgG) adsorbed on an anti-rabbit IgG film. The microfluidic chip was fabricated by using micro-electro-mechanical-systems (MEMS) technology on glass and polydimethylsiloxane (PDMS) substrates to facilitate well-controlled and reproducible sample delivery and detection. Since SPR detection is very sensitive to temperature variation, a micromachine-based temperature control module comprising micro-heaters and temperature sensors was used to maintain a uniform temperature distribution inside the arrayed detection area with a variation of less than 0.3 degrees C. A self-assembled monolayer (SAM) technique was used to pattern the surface chemistry on a gold layer to immobilize anti-rabbit IgG on the modified substrates. The microfluidic chip is capable of transporting a precise amount of IgG solution by using micropumps/valves to the arrayed detection area such that highly sensitive, highly specific bio-sensing can be achieved. The developed microfluidic chips, which employed SPR phase imaging for immunoassay analysis, could successfully detect the interaction of anti-rabbit IgG and IgG. The interactions between immobilized anti-rabbit IgG and IgG with various concentrations have been measured. The detection limit is experimentally found to be 1 x 10(-4)mg/ml (0.67 nM). The specificity of the arrayed immunoassay was also explored. Experimental data show that only the rabbit IgG can be detected and the porcine IgG cannot be adsorbed. The developed microfluidic system is promising for various applications including medical diagnostics, microarray detection and observing protein-protein interactions.
本研究报道了一种集成了阵列免疫分析的微流控芯片,用于特定生物样品的表面等离子体共振(SPR)相成像。SPR相成像系统采用一种表面敏感光学技术,以检测由吸附在抗兔免疫球蛋白G(IgG)膜上的兔IgG引起的二维(2D)空间相位变化。微流控芯片是通过在玻璃和聚二甲基硅氧烷(PDMS)基板上使用微机电系统(MEMS)技术制造的,以促进可控且可重复的样品输送和检测。由于SPR检测对温度变化非常敏感,因此使用了一个基于微机器的温度控制模块,该模块包括微加热器和温度传感器,以在阵列检测区域内保持均匀的温度分布,温度变化小于0.3摄氏度。采用自组装单层(SAM)技术在金层上对表面化学进行图案化,以便在改性基板上固定抗兔IgG。微流控芯片能够通过使用微泵/阀门将精确量的IgG溶液输送到阵列检测区域,从而实现高灵敏度、高特异性的生物传感。所开发的采用SPR相成像进行免疫分析的微流控芯片能够成功检测抗兔IgG和IgG之间的相互作用。已测量了固定化抗兔IgG与不同浓度IgG之间的相互作用。实验发现检测限为1×10^(-4)mg/ml(0.67 nM)。还探索了阵列免疫分析的特异性。实验数据表明,只能检测到兔IgG,而猪IgG不能被吸附。所开发的微流控系统在包括医学诊断、微阵列检测和观察蛋白质 - 蛋白质相互作用等各种应用中具有广阔前景。