Altaf Md, Venkateshwar M, Srijana M, Reddy G
Department of Microbiology, Osmania University, Hyderabad, India.
J Appl Microbiol. 2007 Aug;103(2):372-80. doi: 10.1111/j.1365-2672.2006.03254.x.
Development of cost-effective production medium by applying statistical designs for single-step fermentation of starch (corn flour - CF) to L-(+) lactic acid, using inexpensive nitrogen sources as substitutes for peptone and yeast extract in MRS medium by amylolytic Lactobacillus amylophilus GV6.
A two-level Plackett-Burman design was employed for screening various available crude starches (flours) for L-(+) lactic acid production by Lact. amylophilus GV6 using red lentil flour (RL) and bakers yeast cells (YC) as substitutes for commercial peptone and yeast extract in MRS medium in anaerobic submerged fermentation. Of all the tested flours, CF was found to be the most significant. Central composite rotatable design was employed to determine maximum production of L-(+) lactic acid at optimum values of process variables, CF, RL, YC, CaCO(3) and incubation period (IP). minitab analyses showed that lactic acid production was significantly affected by the linear terms CF, RL, CaCO(3) and IP. The interactions of CF-RL, CF-YC, CF-CaCO(3), RL-YC and RL-CaCO(3) and the square terms CF and IP were significant. The maximum lactic acid production of 29 g/37 g of starch present in 50 g of CF was obtained at optimized concentrations of CF 5%, RL 0.7%, YC 0.8%, CaCO(3) 0.8% and IP 2.9 days.
Successful application of Plackett-Burman design helped in identifying CF as the best carbon source among the tested flours for L-(+) lactic acid production using inexpensive nitrogen sources. Further optimization of the process variables by response surface methods (RSMs) led to maximum production of lactic acid (29 g lactic acid from 37 g of starch present in 50 g of flour).
Lactobacillus amylophilus GV6 showed 78.4% lactic acid production efficiency (g lactic acid produced/g starch taken) and 96% lactic acid yield efficiency (g lactic acid produced/g starch utilized). Information from the present studies provides a better understanding on production of L-(+) lactic acid on fermentation of CF using inexpensive nitrogen sources and on changes in the production as a response from interaction of factors. Use of inexpensive nitrogen sources and starch as substrate in MRS medium for single-step fermentation of lactic acid can become an efficient, economic and viable process. This report is on optimization of inexpensive nitrogen sources completely replacing peptone and yeast extract in single-step submerged fermentation of starch (present in CF) to lactic acid with high production efficiency.
通过应用统计设计,开发具有成本效益的生产培养基,用于嗜淀粉乳杆菌GV6将淀粉(玉米粉 - CF)一步发酵为L-(+)乳酸,使用廉价氮源替代MRS培养基中的蛋白胨和酵母提取物。
采用二级Plackett-Burman设计,筛选各种可用的粗淀粉(面粉),用于嗜淀粉乳杆菌GV6在厌氧深层发酵中生产L-(+)乳酸,使用红小扁豆粉(RL)和面包酵母细胞(YC)替代MRS培养基中的商业蛋白胨和酵母提取物。在所有测试的面粉中,CF被发现是最显著的。采用中心复合旋转设计来确定在工艺变量CF、RL、YC、CaCO₃和培养期(IP)的最佳值下L-(+)乳酸的最大产量。Minitab分析表明,乳酸产量受到CF、RL、CaCO₃和IP线性项的显著影响。CF-RL、CF-YC、CF-CaCO₃、RL-YC和RL-CaCO₃的相互作用以及CF和IP的平方项是显著的。在CF浓度为5%、RL浓度为0.7%、YC浓度为0.8%、CaCO₃浓度为0.8%和IP为2.9天的优化浓度下,从50 g CF中存在的37 g淀粉中获得了29 g的最大乳酸产量。
Plackett-Burman设计的成功应用有助于确定CF是使用廉价氮源生产L-(+)乳酸的测试面粉中最佳的碳源。通过响应面法(RSMs)进一步优化工艺变量导致乳酸产量最大化(从50 g面粉中存在的37 g淀粉中产生29 g乳酸)。
嗜淀粉乳杆菌GV6显示出78.4%的乳酸生产效率(产生的乳酸克数/取用的淀粉克数)和96%的乳酸产率效率(产生的乳酸克数/利用的淀粉克数)。本研究的信息提供了对使用廉价氮源发酵CF生产L-(+)乳酸以及作为因素相互作用响应的产量变化的更好理解。在MRS培养基中使用廉价氮源和淀粉作为底物进行乳酸一步发酵可以成为一个高效、经济且可行的过程。本报告是关于在淀粉(存在于CF中)一步深层发酵为乳酸的过程中,完全替代蛋白胨和酵母提取物的廉价氮源的优化,具有高生产效率。