Three-dimensional quantitative dose reduction analysis in MammoSite balloon by Monte Carlo calculations.

Current treatment planning systems (TPSs) for partial breast irradiation using the MammoSite brachytherapy applicator (Cytyc Corporation, Marlborough, MA) often neglect the effect of inhomogeneity, leading to potential inaccuracies in dose distributions. Previous publications either have studied only a planar dose perturbation along the bisector of the source or have paid little attention to the anisotropy effect of the system. In the present study, we investigated the attenuation-corrected radial dose and anisotropy functions in a form parallel to the updated American Association of Physicists in Medicine TG-43 formalism. This work quantitatively delineates the inaccuracies in dose distributions in three-dimensional space. Monte Carlo N-particle transport code simulations in coupled photon-electron transport were used to quantify the changes in dose deposition and distribution caused by the increased attenuation coefficient of iodine-based contrast solution. The source geometry was that of the VariSource wire model VS2000 (Varian Medical Systems, Palo Alto, CA). The concentration of the iodine-based solution was varied from 5% to 25% by volume, a range recommended by the balloon's manufacturer. Balloon diameters of 4, 5, and 6 cm were simulated. Dose rates at the typical prescription line (1 cm away from the balloon surface) were determined for various polar angles. The computations showed that the dose rate reduction throughout the entire region of interest ranged from 0.64% for the smallest balloon diameter and contrast concentration to 6.17% for the largest balloon diameter and contrast concentration. The corrected radial dose function has a predominant influence on dose reduction, but the corrected anisotropy functions explain only the effect at the MammoSite system poles. By applying the corrected radial dose and anisotropy functions to TPSs, the attenuation effect can be reduced to the minimum.