Ovechkina E E, Gaysinskiy V, Miller S R, Brecher C, Lempicki A, Nagarkar V V
Radiation Monitoring Devices, Inc., 44 Hunt Street, Watertown, MA 02472, USA.
Radiat Meas. 2007 May;42(4-5):541-544. doi: 10.1016/j.radmeas.2007.01.086.
Despite the acknowledged advantages of CsI:Tl in many scintillator applications, a characteristic property that undermines its use in high-speed radiographic and radionuclide imaging is the presence of a strong afterglow component in its scintillation decay. This causes pulse pileup in high count-rate applications, reduced energy resolution in radionuclide imaging, and reconstruction artifacts in computed tomography applications. The research outlined here addresses the specific issue of suppressing the afterglow in CsI:Tl crystals by modifying them with codopants. In previous work we reported that one specific codopant, Eu(2+), was particularly effective in this regard, lowering the normalized intensity of the afterglow in the time range of 10 mus - 100 ms by almost two orders of magnitude compared to conventional material. We also found, however, that the extent of the suppressive effect was significantly influenced by the presence of additional additives, some of which were inadvertently introduced by the very material that provided the primary Eu codopant itself. The effects of these secondary codopants, which include elemental iodine and various oxidic species, are addressed in the present investigation.
尽管碘化铯铊(CsI:Tl)在许多闪烁体应用中具有公认的优势,但在其闪烁衰减过程中存在强烈的余辉成分,这一特性削弱了它在高速射线照相和放射性核素成像中的应用。这会在高计数率应用中导致脉冲堆积,在放射性核素成像中降低能量分辨率,并在计算机断层扫描应用中产生重建伪影。本文概述的研究旨在解决通过用共掺杂剂对CsI:Tl晶体进行改性来抑制其余辉这一具体问题。在之前的工作中我们报道,一种特定的共掺杂剂Eu(2+)在这方面特别有效,与传统材料相比,在10微秒至100毫秒的时间范围内,将余辉的归一化强度降低了近两个数量级。然而,我们还发现,抑制效果的程度受到其他添加剂存在的显著影响,其中一些添加剂是由提供主要Eu共掺杂剂本身的材料无意中引入的。本研究探讨了这些次要共掺杂剂的影响,其中包括元素碘和各种氧化态物质。