Zhu Yongming, Lee Y Y, Elander Richard T
Department of Chemical Engineering, Auburn University, AL 36849, USA.
Appl Biochem Biotechnol. 2007 Apr;137-140(1-12):721-38. doi: 10.1007/s12010-007-9092-9.
Treatment of corn stover with aqueous ammonia removes most of the structural lignin, whereas retaining the majority of the carbohydrates in the solids. After treatment, both the cellulose and hemicellulose in corn stover become highly susceptible to enzymatic digestion. In this study, corn stover treated by aqueous ammonia was investigated as the substrate for lactic acid production by simultaneous saccharification and cofermentation (SSCF). A commercial cellulase (Spezyme-CP) and Lactobacillus pentosus American Type Culture Collection (ATCC) 8041 (Spanish Type Culture Collection [CECT]-4023) were used for hydrolysis and fermentation, respectively. In batch SSCF operation, the carbohydrates in the treated corn stover were converted to lactic acid with high yields, the maximum lactic acid yield reaching 92% of the stoichiometric maximum based on total fermentable carbohydrates (glucose, xylose, and arabinose). A small amount of acetic acid was also produced from pentoses through the phosphoketolase pathway. Among the major process variables for batch SSCF, enzyme loading and the amount of yeast extract were found to be the key factors affecting lactic acid production. Further tests on nutrients indicated that corn steep liquor could be substituted for yeast extract as a nitrogen source to achieve the same lactic acid yield. Fed-batch operation of the SSCF was beneficial in raising the concentration of lactic acid to a maximum value of 75.0 g/L.
用氨水处理玉米秸秆可去除大部分结构性木质素,而固体中的大部分碳水化合物得以保留。处理后,玉米秸秆中的纤维素和半纤维素都变得极易被酶消化。在本研究中,对经氨水预处理的玉米秸秆作为底物通过同步糖化共发酵(SSCF)生产乳酸进行了研究。分别使用一种商业纤维素酶(Spezyme-CP)和戊糖乳杆菌美国模式培养物保藏库(ATCC)8041(西班牙模式培养物保藏库[CECT]-4023)进行水解和发酵。在分批SSCF操作中,处理后的玉米秸秆中的碳水化合物被高效转化为乳酸,基于总可发酵碳水化合物(葡萄糖、木糖和阿拉伯糖)计算,最大乳酸产量达到化学计量最大值的92%。通过磷酸酮醇酶途径,戊糖还会产生少量乙酸。在分批SSCF的主要工艺变量中,酶负载量和酵母提取物用量是影响乳酸产量的关键因素。对营养物质的进一步测试表明,玉米浆可以替代酵母提取物作为氮源,以实现相同的乳酸产量。SSCF的补料分批操作有利于将乳酸浓度提高到最大值75.0 g/L。