Department of Chemical Engineering, Auburn University, Auburn, AL 36849, USA.
Appl Biochem Biotechnol. 2010 May;161(1-8):53-66. doi: 10.1007/s12010-009-8893-4. Epub 2010 Jan 23.
Paper mill sludge is a solid waste material composed of pulp residues and ash generated from pulping and paper making processes. The carbohydrate portion of the sludge has chemical and physical characteristics similar to pulp. Because of its high carbohydrate content and well-dispersed structure, the sludges can be biologically converted to value-added products without pretreatment. In this study, two different types of paper mill sludges, primary sludge and recycle sludge, were evaluated as a feedstock for bioconversion to ethanol. The sludges were first subjected to enzymatic conversion to sugars by commercial cellulase enzymes. The enzymatic conversion was inefficient because of interference by ash in the sludges with the enzymatic reaction. The main cause was that the pH level is dictated by CaCO3 in ash, which is two units higher than the pH optimum of cellulase. To alleviate this problem, simultaneous saccharification and cofermentation (SSCF) using cellulase (Spezyme CP) and recombinant Escherichia coli (ATCC-55124), and simultaneous saccharification and fermentation (SSF) using cellulase and Saccharomyces cerevisiae (ATCC-200062) were applied to the sludges without any pretreatment. Ethanol yields of 75-81% of the theoretical maximum were obtained from the SSCF on the basis of total carbohydrates. The yield from the SSF was also found to be in the range of 74-80% on the basis of glucan. The SSCF and SSF proceeded under stable condition with the pH staying near 5.0, close to the optimum for cellulase. Decrease of pH occurred due to carbonic acid and other organic acids formed during fermentation. The ash was partially neutralized by the acids produced from the SSCF and SSF and acted as a buffer to stabilize the pH during fermentation. When the SSF and SSCF were operated in fed-batch mode, the ethanol concentration in the broth increased from 25.5 and 32.6 g/L (single feed) to 45 and 42 g/L, respectively. The ethanol concentration was limited by the tolerance of the microorganism in the case of SSCF. The ethanol yield in fed-batch operation decreased to 68% for SSCF and 70% for SSF. The high-solids condition in the bioreactor appears to create adverse effects on the cellulase reaction.
造纸厂污泥是一种由纸浆残留物和制浆造纸过程中产生的灰烬组成的固体废物。污泥中的碳水化合物部分具有类似于纸浆的化学和物理特性。由于其高碳水化合物含量和良好分散的结构,污泥无需预处理即可通过生物转化为增值产品。在这项研究中,两种不同类型的造纸厂污泥,即初沉污泥和再循环污泥,被评估为生物转化为乙醇的原料。首先,通过商业纤维素酶将污泥中的碳水化合物酶解为糖。由于灰分干扰了酶反应,酶解效率不高。主要原因是灰分中的 CaCO3 决定了 pH 值,比纤维素酶的最适 pH 值高两个单位。为了解决这个问题,在没有任何预处理的情况下,使用纤维素酶(Spezyme CP)和重组大肠杆菌(ATCC-55124)进行同步糖化和共发酵(SSCF),以及使用纤维素酶和酿酒酵母(ATCC-200062)进行同步糖化和发酵(SSF)。根据总碳水化合物,SSCF 可获得 75-81%的理论最大乙醇产量。根据葡聚糖,SSF 的产量也在 74-80%的范围内。SSCF 和 SSF 在 pH 值接近 5.0 的稳定条件下进行,接近纤维素酶的最适 pH 值。由于发酵过程中形成的碳酸和其他有机酸,pH 值下降。SSCF 和 SSF 产生的酸部分中和了灰分,并起到缓冲作用,使发酵过程中的 pH 值保持稳定。当 SSF 和 SSCF 以分批补料方式运行时,发酵液中的乙醇浓度从 25.5 和 32.6 g/L(单次进料)分别增加到 45 和 42 g/L。在 SSCF 的情况下,乙醇浓度受到微生物耐受能力的限制。分批进料操作的乙醇产率下降到 SSCF 的 68%和 SSF 的 70%。生物反应器中的高固体浓度似乎对纤维素酶反应产生了不利影响。