Bender João Paulo, Mazutti Marcio Antônio, Di Luccio Marco, Treichel Helen
Departamento de Engenharia de Alimentos, Universidade Regional Integrada do Alto Uruguai e das Missões Campus de Erechim, Av. Sete de Setembro 1621, Erechim 99700-000, Brazil.
Appl Biochem Biotechnol. 2008 Jun;149(3):195-203. doi: 10.1007/s12010-007-8111-1. Epub 2008 Jan 19.
Production of inulinase by solid state fermentation always involves an extraction step, which dictates enzyme recovery yield and is related to cultivation conditions and control of process parameters. This work is focused on the study of extraction conditions aiming to maximize yield of an inulinase obtained by solid state fermentation of sugar cane bagasse and Kluyveromyces marxianus NRRL Y-7571. Kinetics of extraction was followed varying the kind of solvent used. After determining the best solvent, an experimental design was carried out to study the effect of the solid/liquid ratio (1:10-1:20), extraction temperature (20-53 degrees C), and stirring rate (50-177 rpm). Results showed that maximum yield was obtained when sodium acetate buffer 0.1 M pH 4.8 was used, using a solid/liquid ratio of 1:10, at 53 degrees C and 150 rpm for 40 min.
通过固态发酵生产菊粉酶总是涉及一个提取步骤,这决定了酶的回收率,并且与培养条件和工艺参数的控制有关。这项工作专注于研究提取条件,旨在使通过甘蔗渣和马克斯克鲁维酵母NRRL Y - 7571固态发酵获得的菊粉酶产量最大化。通过改变所用溶剂的种类来跟踪提取动力学。确定最佳溶剂后,进行了一项实验设计,以研究固液比(1:10 - 1:20)、提取温度(20 - 53℃)和搅拌速率(50 - 177转/分钟)的影响。结果表明,当使用0.1M pH 4.8的醋酸钠缓冲液,固液比为1:10,在53℃和150转/分钟下搅拌40分钟时,可获得最大产量。