Forister Julie F Y, Chao Jerry, Khy Kaliline, Forister Eric, Weissman Barry A
Jules Stein Eye Institute, Department of Ophthalmology, David Geffen School of Medicine at UCLA, Los Angeles, CA 90095-7003, USA.
Cont Lens Anterior Eye. 2008 Oct;31(5):228-41; quiz 274-5. doi: 10.1016/j.clae.2008.06.003. Epub 2008 Jul 30.
The goal of this study was to apply a theoretical analysis of the relationship between contact lens oxygen transmissibility and tear layer oxygen tension to silicone hydrogel toric lenses and thereby model the success of such lenses in decreasing corneal hypoxia.
Lens thickness was measured at different points along the vertical meridian of one prism-ballasted, one dynamic-stabilized silicone hydrogel toric lens design, and one control "traditional" hydrogel toric lens design. Using lens thickness measurements and the nominal oxygen permeability values of these three lens designs, the subsequent oxygen tension in the tear layer trapped between the contact lens and the anterior cornea (P2) were calculated for both open- and closed-eye conditions using a single corneal chamber model with a personal computer program.
We found that cylindrical powers, regardless of lens materials, did not have a statistically significant effect on lens thickness (F=0.30, p=0.5834) to the limitation of our measurements, while contact lens type, spherical power, location on lens, and axis of cylindrical power were all found to do so. When multi-factor ANOVA was applied to the lens thickness and P2 data, contact lens location had a statistically significant effect on P2 values for both prism-ballasted (F=640.16, p<0.0001) and dynamic-stabilized toric lenses (F=352.85, p<0.0001). When the same statistical methodology was used to compare the relative performance of all three lenses on P2 during daily wear, the average P2 values for the three different lens brands were all statistically significantly different, while under closed-eye conditions the average P2 values for both silicone hydrogel toric lenses were no longer statistically significantly different (F=1.00, p=0.3178).
Assuming that the critical P2 was 100 mmHg, we predicted that silicone hydrogel toric soft lenses would provide reasonable anterior corneal oxygenation, certainly much enhanced over the environment predicted under traditional hydrogel designs, especially during daily (e.g. open eye) wear. Substantial corneal hypoxia continued to be predicted during extended wear of all lenses, but especially so with the use of traditional hydrogels.
本研究的目的是将隐形眼镜透氧性与泪液层氧张力之间关系的理论分析应用于硅水凝胶散光镜片,从而模拟此类镜片在减轻角膜缺氧方面的成效。
沿一个棱镜稳定型、一个动态稳定型硅水凝胶散光镜片设计以及一个对照“传统”水凝胶散光镜片设计的垂直子午线在不同点测量镜片厚度。利用这些镜片厚度测量值以及这三种镜片设计的标称透氧率值,使用带有个人计算机程序的单角膜腔模型计算在睁眼和闭眼条件下隐形眼镜与角膜前表面之间滞留的泪液层中的后续氧张力(P2)。
我们发现,在所测量的范围内,柱镜度数无论镜片材料如何,对镜片厚度均无统计学显著影响(F = 0.30,p = 0.5834),而隐形眼镜类型、球镜度数、镜片上的位置以及柱镜度数的轴位均有影响。当对镜片厚度和P2数据进行多因素方差分析时(ANOVA),对于棱镜稳定型(F = 640.16,p < 0.0001)和动态稳定型散光镜片(F = 352.85,p < 0.0001),隐形眼镜位置对P2值均有统计学显著影响。当使用相同的统计方法比较所有三种镜片在日常佩戴期间P2的相对性能时,三种不同镜片品牌的平均P2值均有统计学显著差异,而在闭眼条件下,两种硅水凝胶散光镜片的平均P2值不再有统计学显著差异(F = 1.00,p = 0.3178)。
假设临界P2为100 mmHg,我们预测硅水凝胶散光软性镜片将提供合理的角膜前表面氧合,肯定比传统水凝胶设计所预测的环境有很大改善,尤其是在日常(如睁眼)佩戴期间。在所有镜片的长时间佩戴过程中,尤其是使用传统水凝胶镜片时,预计仍会存在严重的角膜缺氧情况。