Walderhaug Harald, Knudsen Kenneth D
Department of Chemistry, University of Oslo, Oslo, Norway.
Langmuir. 2008 Oct 7;24(19):10637-45. doi: 10.1021/la800344h. Epub 2008 Aug 27.
Microemulsion samples of a polyoxyethylene trisiloxane surfactant, water, and 1-decanol are investigated using pulsed field gradient NMR and small-angle neutron scattering (SANS) to determine the solution structure. The surfactant/decanol weight ratio has been kept constant at values of 10:1, 8:1, and 6:1 under variation of water content. The temperature was 32 degrees C for the measurement series at the weight ratio of 10:1 to avoid phase separation at high water content. Also, aqueous surfactant solution samples have been investigated as a function of composition and temperature. Water-rich samples consist of micelles that are close to spherical at very low surfactant concentration and grow into anisometric, that is, oblate formed aggregates, at higher surfactant (or surfactant and decanol) concentration. The aggregates grow with increasing temperature, most probably due to dehydration of the hydrophilic groups. In a concentration range around 50 wt % water, the systems form bicontinuous structures. SANS data are used to estimate surfactant film properties using a model developed for interpretation of neutron scattering data from related systems.
使用脉冲场梯度核磁共振和小角中子散射(SANS)对聚氧乙烯三硅氧烷表面活性剂、水和1-癸醇的微乳液样品进行研究,以确定溶液结构。在水含量变化的情况下,表面活性剂/癸醇的重量比保持恒定,分别为10:1、8:1和6:1。在重量比为10:1的测量系列中,温度为32℃,以避免在高水含量下发生相分离。此外,还研究了水性表面活性剂溶液样品随组成和温度的变化情况。富水样品由胶束组成,在非常低的表面活性剂浓度下接近球形,而在较高的表面活性剂(或表面活性剂和癸醇)浓度下会生长成非等轴的,即扁球形的聚集体。聚集体随着温度升高而生长,很可能是由于亲水基团的脱水。在水含量约为50 wt%的浓度范围内,体系形成双连续结构。使用为解释来自相关体系的中子散射数据而开发的模型,利用SANS数据估算表面活性剂膜的性质。