Galaud B, Beaufils P, Michaut M, Abadie P, Fallet L, Boisrenoult P
Service d'orthopédie traumatologie, centre hospitalier de Versailles, 177, rue de Versailles, 78150 Le Chesnay, France.
Rev Chir Orthop Reparatrice Appar Mot. 2008 Oct;94(6):573-9. doi: 10.1016/j.rco.2008.03.039. Epub 2008 Jul 9.
Proper positioning of the prosthesis components in total knee arthroplasty is an important factor for satisfactory outcomes such as mobility, pain and wear. If an independent cutting technique is performed, rotational alignment of the femoral component should adapt patient's specific anatomy. The distal epiphyseal femoral torsion (DEFT) is adjusted in order to align the prosthetic posterior condylar axis along the bone transepicondylar axis. The DEFT presents a high rate of interindividual variations. Computed tomography scanning produces reliable and reproducible measurement of the epiphyseal torsion, but this requires additional procedure. We therefore used intraoperative computed navigation for DEFT measurement, thus accurately adapting each patient's epiphyseal torsion during the procedure, without resorting to the preoperative CT scan.
This prospective study included 70 patients with arthritic knees who underwent TKA. Mean patient age was 74 years old. There were 52 women, 35 right knees, 33 genu varum, 19 genu valgum, 18 normal knees. DEFT was determined by preoperative CT scan, using the Yoshioka angle referencing. Distal epiphyseal femoral torsion measurement was carried out using the Navitrack system (Orthosoft). The DEFT was the navigated measured angle between the transepicondylar axis and the posterior condylar axis manually located and digitized with an optically tracked stylus. The navigation system was therefore used as a simple digital measurement device to evaluate the distal epiphyseal femoral torsion. We had established the reference transepicondylar axis as the line connecting the prominence of the medial and lateral epicondyles. During the procedure, we also carried out computer-assisted measurement of HKA axis in full extension and at 90 degrees of knee flexion. Correlation between the navigated HKA in full extension and HKA measured on the preoperative pangonogram (R(2)=0.621) demonstrated a high reliability of the navigation system in the frontal plane.
There was no correlation between the mean epiphyseal torsion determined with computer navigation and the epiphyseal torsion measured on the CT scan (R(2)=0.09). Significant interindividual variations were reported. Navigated HKA at 90 degrees of knee flexion was not correlated with navigated HKA in full extension (R(2)=0.398) nor with epiphyseal torsion measured on the CT scan (R(2)=0.063). Results demonstrated a major interindividual variation.
Our results report a large variability in distal epiphyseal femoral torsion measured with CT scan. Moreover, computed navigation does not provide a reliable and reproducible evaluation of the epiphyseal torsion. Due to inaccurate identification of femoral epicondyles, the related navigated measurement is not considered to be reliable and reproducible. Navigated HKA at 90 degrees of knee flexion is not a fair indirect reflection of epiphyseal torsion. Computer-assisted navigation fails to provide direct or indirect, reliable and reproducible intraoperative measurement of distal epiphyseal femoral torsion. Preoperative CT scan is the only reliable method to produce accurate measurement of distal epiphyseal femoral torsion.
全膝关节置换术中假体组件的正确定位是实现诸如活动度、疼痛和磨损等满意手术效果的重要因素。如果采用独立截骨技术,股骨组件的旋转对线应适应患者的特定解剖结构。为使假体后髁轴沿股骨髁间轴对齐,需调整股骨远端骨骺扭转(DEFT)。DEFT存在较高的个体间差异。计算机断层扫描可对骨骺扭转进行可靠且可重复的测量,但这需要额外的操作步骤。因此,我们在术中使用计算机导航来测量DEFT,从而在手术过程中准确适应每个患者的骨骺扭转情况,而无需进行术前CT扫描。
这项前瞻性研究纳入了70例接受全膝关节置换术(TKA)的膝关节炎患者。患者平均年龄为74岁。其中女性52例,右膝35例,膝内翻33例,膝外翻19例,正常膝关节18例。术前通过CT扫描,采用吉冈角参考法确定DEFT。使用Navitrack系统(Orthosoft)进行股骨远端骨骺扭转测量。DEFT是通过光学跟踪探针手动定位并数字化的髁间轴与后髁轴之间的导航测量角度。因此,导航系统被用作一种简单的数字测量设备来评估股骨远端骨骺扭转。我们将参考髁间轴确定为连接内外侧髁突出点的线。在手术过程中,我们还在膝关节完全伸直和屈曲90度时对HKA轴进行了计算机辅助测量。膝关节完全伸直时导航测量的HKA与术前正位X线片上测量的HKA之间的相关性(R² = 0.621)表明,导航系统在额状面具有较高的可靠性。
计算机导航确定的平均骨骺扭转与CT扫描测量的骨骺扭转之间无相关性(R² = 0.09)。报告存在显著的个体间差异。膝关节屈曲90度时导航测量的HKA与膝关节完全伸直时导航测量的HKA不相关(R² = 0.398),也与CT扫描测量的骨骺扭转不相关(R² = 0.063)。结果显示存在较大的个体间差异。
我们的结果表明,CT扫描测量的股骨远端骨骺扭转存在很大变异性。此外,计算机导航不能对骨骺扭转提供可靠且可重复的评估。由于股骨髁识别不准确,相关的导航测量不被认为是可靠且可重复的。膝关节屈曲90度时导航测量的HKA不能公平地间接反映骨骺扭转。计算机辅助导航无法提供对股骨远端骨骺扭转的直接或间接、可靠且可重复的术中测量。术前CT扫描是准确测量股骨远端骨骺扭转的唯一可靠方法。