Dynamic in vitro dehydration patterns of unworn and worn silicone hydrogel contact lenses.

PURPOSE

To evaluate the effect of wear on dynamic in vitro dehydration of silicone hydrogel (Si-Hi) contact lens (CL) using a previously described gravimetric procedure.

METHODS

Five different silicone hydrogel (Si-Hi) contact lenses (CL) were evaluated after being worn by patients under daily wear conditions for 15 days to 1 month. Lenses were conditioned and disinfected with a multipurpose solution after each day of wear. Lenses were left to dehydrate in an analytical balance under controlled conditions of temperature and relative humidity and the results compared with data from new lens samples of the same power and material. Several quantitative parameters were obtained and compared between worn and unworn samples.

RESULTS

The quantitative parameters derived from the dehydration curves showed statistically significant differences between worn and unworn lenses regarding the initial dehydration rate and ability to maintain their original hydration. Worn lenses showed shorter phase I duration (decreased by 30 to 60% compared to unworn samples), a significantly faster initial dehydration rate (increased by about 1%/minute), and lower water retention index (decreased by 10 to 20%) as derived from the initial cumulative dehydration. All the differences were statistically significant for all lenses (p < 0.05).

CONCLUSION

The initial dehydration rates were significantly increased in all CL after wear. This could be of clinical interest because it represents the average initial dehydration rates during the first moments when the lens is left to dehydrate after a blink. This study suggests that even after the lenses had been equilibrated in saline solution for several days, the materials lose their ability to retain water.