Piai Juliana F, Rubira Adley F, Muniz Edvani C
Grupo de Materiais Poliméricos e Compósitos, GMPC, Departamento de Química, Universidade Estadual de Maringá, Av. Colombo 5790, 87020-900 Maringá, Paraná, Brazil.
Acta Biomater. 2009 Sep;5(7):2601-9. doi: 10.1016/j.actbio.2009.03.035. Epub 2009 Apr 1.
A hydrogel constituted of chitosan (CT) and chondroitin sulfate (CS) was synthesized. In previously reported works the stochiometric ratio has been used, but in this paper an excess of CS (40% CT and 60% CS) was used because the hydrogel could be applied as a CS carrier. The hydrogel properties were investigated by differential scanning calorimetry, wide-angle X-ray scattering (WAXS), scanning electron microscopy, and high-performance liquid chromatography. Changes in the pH of the gel-surrounding liquid had a considerable effect on both the release and the molecular reorganization of CS. Furthermore, the formed hydrogel exhibited interesting parameters for use in biotechnology, such as water affinity, thermal properties and morphology upon sequential pH variation. The protonation or deprotonation of the different groups that participate in the complex formation and the coiling or uncoiling of like or unlike chains concomitant to the release of CS are believed to be the main factors affecting the hydrogel properties. CS was released mainly at pH higher than 6.5, the value of pK(aCT), and the released CS maximum fraction was approximately 0.5. The WAXS data demonstrated that the CT/CS complex in the hydrogel presented macromolecular reorganization at pHs ranging from 6 to 12.
合成了一种由壳聚糖(CT)和硫酸软骨素(CS)构成的水凝胶。在先前报道的研究中使用的是化学计量比,但在本文中使用了过量的CS(40% CT和60% CS),因为该水凝胶可作为CS载体。通过差示扫描量热法、广角X射线散射(WAXS)、扫描电子显微镜和高效液相色谱对水凝胶的性质进行了研究。凝胶周围液体pH值的变化对CS的释放和分子重组都有相当大的影响。此外,形成的水凝胶在生物技术应用中表现出有趣的参数,如在连续pH变化时的水亲和力、热性质和形态。参与复合物形成的不同基团的质子化或去质子化以及与CS释放相伴的同类或不同类链的卷曲或解卷曲被认为是影响水凝胶性质的主要因素。CS主要在高于6.5(pK(aCT)的值)的pH值下释放,释放的CS最大比例约为0.5。WAXS数据表明,水凝胶中的CT/CS复合物在pH值为6至12的范围内呈现大分子重组。