Manjubala I, Liu Y, Epari D R, Roschger P, Schell H, Fratzl P, Duda G N
Max Planck Institute of Colloids and Interfaces, Department of Biomaterials, 14424 Potsdam, Germany.
Bone. 2009 Aug;45(2):185-92. doi: 10.1016/j.bone.2009.04.249. Epub 2009 May 3.
After bone fracture, various cellular activities lead to the formation of different tissue types, which form the basis for the process of secondary bone healing. Although these tissues have been quantified by histology, their material properties are not well understood. Thus, the aim of this study is to correlate the spatial and temporal variations in the mineral content and the nanoindentation modulus of the callus formed via intramembranous ossification over the course of bone healing. Midshaft tibial samples from a sheep osteotomy model at time points of 2, 3, 6 and 9 weeks were employed. PMMA embedded blocks were used for quantitative back scattered electron imaging and nanoindentation of the newly formed periosteal callus near the cortex. The resulting indentation modulus maps show the heterogeneity in the modulus in the selected regions of the callus. The indentation modulus of the embedded callus is about 6 GPa at the early stage. At later stages of mineralization, the average indentation modulus reaches 14 GPa. There is a slight decrease in average indentation modulus in regions distant to the cortex, probably due to remodelling of the peripheral callus. The spatial and temporal distribution of mineral content in the callus tissue also illustrates the ongoing remodelling process observed from histological analysis. Most interestingly the average indentation modulus, even at 9 weeks, remains as low as 13 GPa, which is roughly 60% of that for cortical sheep bone. The decreased indentation modulus in the callus compared to cortex is due to the lower average mineral content and may be perhaps also due to the properties of the organic matrix which might be different from normal bone.
骨折后,各种细胞活动导致不同组织类型的形成,这些组织构成了继发性骨愈合过程的基础。尽管这些组织已通过组织学进行了量化,但其材料特性仍未得到充分了解。因此,本研究的目的是关联在骨愈合过程中通过膜内成骨形成的骨痂的矿物质含量和纳米压痕模量的时空变化。使用来自绵羊截骨模型在2、3、6和9周时间点的胫骨干中段样本。聚甲基丙烯酸甲酯(PMMA)包埋块用于对皮质附近新形成的骨膜骨痂进行定量背散射电子成像和纳米压痕测试。所得的压痕模量图显示了骨痂选定区域中模量的异质性。包埋骨痂在早期的压痕模量约为6吉帕。在矿化后期,平均压痕模量达到14吉帕。在远离皮质的区域,平均压痕模量略有下降,这可能是由于外周骨痂的重塑。骨痂组织中矿物质含量的时空分布也说明了从组织学分析中观察到的正在进行的重塑过程。最有趣的是,即使在9周时,平均压痕模量仍低至13吉帕,约为绵羊皮质骨的60%。与皮质相比,骨痂中压痕模量降低是由于平均矿物质含量较低,也可能是由于有机基质的特性可能与正常骨不同。