Department of Environmental Chemistry and Microbiology, National Environmental Research Institute, Aarhus University, Frederiksborgvej 399, P.O. Box 358, 4000 Roskilde, Denmark.
Chem Res Toxicol. 2010 Jan;23(1):55-65. doi: 10.1021/tx900274j.
Toxicity testing of hydrophobic organic compounds (HOCs) in plastic cell culture plates is problematic due to compound losses through volatilization and sorption to the wells and culture medium constituents. This leads to poorly defined exposure and reduced test sensitivity. Passive dosing can overcome these problems by the continual partitioning of HOCs from a dominating reservoir loaded in a biologically inert polymer such as silicone, providing defined and constant freely dissolved concentrations and also eliminating spiking with cosolvents. This study aimed to select a suitable passive dosing format for in vitro tests in multiwell plates and characterize its performance at 37 degrees C. Silicone O-rings were the most suitable format; they were both practical and demonstrated excellent passive dosing performance. (1) The rings were loaded by partitioning from a methanol solution containing polycyclic aromatic hydrocarbons (PAHs) (log K(OW), 3.33-6.43) that served as model compounds, followed by removal of the methanol with water. This resulted in highly reproducible HOC concentrations in the silicone O-rings. (2) The release of PAHs into aqueous solutions was rapid and reproducible, with equilibrium partitioning being reached within hours. (3) The buffering capacity of the O-rings was sufficient to maintain stable concentrations over more than 72 h. The O-rings were then applied to test a range of PAHs at their aqueous solubility in an array of established in vitro cell culture assays with human cells and cell lines. These included the formation of reactive oxygen species, induction of the IL-8 cytokine promoter, and secretion of MCP-1 by the cells. The biological responses depended on the melting point of the individual PAHs and their maximum chemical activities (a(max)). Only those PAHs with the highest a(max) stimulated the formation of reactive oxygen species and MCP-1 secretion, while they inhibited the induction of the IL-8 cytokine promoter.
由于化合物通过挥发和吸附到孔和培养基成分中而损失,因此在塑料细胞培养板中对疏水性有机化合物(HOCs)进行毒性测试是有问题的。这导致暴露定义不明确,测试灵敏度降低。通过将 HOC 从主导储层中连续分配到生物惰性聚合物(如硅酮)中,可以克服这些问题,从而进行被动给药,从而提供明确和恒定的自由溶解浓度,并消除与共溶剂混合。本研究旨在选择适用于多孔板中体外测试的合适的被动给药形式,并在 37°C 下表征其性能。硅酮 O 形圈是最合适的形式;它们既实用又表现出出色的被动给药性能。(1)通过从含有多环芳烃(PAHs)(log K(OW),3.33-6.43)的甲醇溶液中分配来加载环,该溶液用作模型化合物,然后用去离子水除去甲醇。这导致硅酮 O 形圈中 HOC 浓度高度重现。(2)PAHs 迅速且可重复地释放到水溶液中,在几小时内达到平衡分配。(3)O 形圈的缓冲能力足以在超过 72 小时的时间内保持稳定的浓度。然后将 O 形圈应用于测试一系列在各种已建立的人类细胞和细胞系的体外细胞培养测定中在水中溶解度的 PAHs。这些包括活性氧的形成,白细胞介素-8 细胞因子启动子的诱导以及细胞 MCP-1 的分泌。生物反应取决于各个 PAHs 的熔点及其最大化学活性(a(max))。只有那些具有最高 a(max)的 PAHs 才能刺激活性氧的形成和 MCP-1 的分泌,而它们则抑制白细胞介素-8 细胞因子启动子的诱导。