Department of Chemistry, Karl-Franzens-University, Heinrichstrasse 28, A-8010 Graz, Austria.
J Colloid Interface Sci. 2010 Feb 15;342(2):392-8. doi: 10.1016/j.jcis.2009.10.054. Epub 2009 Oct 25.
The present article reports on the specific effects of temperature on Phytantriol-based cubosomes stabilized by inorganic stabilizers as opposed to organic stabilizers. The ability of Laponite to stabilize Phytantriol-based parent bulk phase is first demonstrated. The sub-micron-sized Laponite-stabilized particles were found to be both physically and chemically stable over time. The temperature-induced behavior, both in heating and cooling directions, of these lipid-based cubosomes has been investigated and compared with their polymer-stabilized counterparts (Pluronic F127). This allows us to extract the particular influence of each stabilizer. Whereas an increased hydration of the cubic structure was evidenced at high pH values, this effect was eliminated to compare the specific influence of both stabilizers on these Phytantriol-based cubosomes. Evidence of differences in the relaxation rates of the internal structures with temperature was found for the two stabilizers, in particular in the cooling direction whilst in the heating direction the two stabilizers could be considered as undisruptive. The origin of this difference is discussed.
本文报道了温度对基于植烷三醇的立方相的具体影响,其中立方相分别由无机稳定剂和有机稳定剂稳定。首先证明了无机稳定剂 Laponite 能够稳定基于植烷三醇的母体块状相。研究发现,亚微米级的 Laponite 稳定颗粒在物理和化学上随时间推移都是稳定的。研究了这些基于脂质的立方相在加热和冷却方向上的温度诱导行为,并将其与聚合物稳定的立方相(Pluronic F127)进行了比较。这使得我们能够提取出每个稳定剂的特定影响。虽然在高 pH 值下证明了立方结构的水合作用增加,但为了比较两种稳定剂对基于植烷三醇的立方相的特定影响,消除了这种影响。发现两种稳定剂的内部结构的弛豫速率随温度的变化存在差异,特别是在冷却方向,而在加热方向,两种稳定剂可以被认为是无干扰的。讨论了这种差异的起源。