Department of Radiation Oncology, Sant' Andrea Hospital, University La Sapienza, via di Grottarossa 1035-1039, 00189, Rome, Italy.
Radiat Oncol. 2010 Jan 13;5:1. doi: 10.1186/1748-717X-5-1.
To assess the accuracy of fractionated stereotactic radiotherapy (FSRT) using a stereotactic mask fixation system.
Sixteen patients treated with FSRT were involved in the study. A commercial stereotactic mask fixation system (BrainLAB AG) was used for patient immobilization. Serial CT scans obtained before and during FSRT were used to assess the accuracy of patient immobilization by comparing the isocenter position. Daily portal imaging were acquired to establish day to day patient position variation. Displacement errors along the different directions were calculated as combination of systematic and random errors.
The mean isocenter displacements based on localization and verification CT imaging were 0.1 mm (SD 0.3 mm) in the lateral direction, 0.1 mm (SD 0.4 mm) in the anteroposterior, and 0.3 mm (SD 0.4 mm) in craniocaudal direction. The mean 3D displacement was 0.5 mm (SD 0.4 mm), being maximum 1.4 mm. No significant differences were found during the treatment (P=0.4). The overall isocenter displacement as calculated by 456 anterior and lateral portal images were 0.3 mm (SD 0.9 mm) in the mediolateral direction, -0.2 mm (SD 1 mm) in the anteroposterior direction, and 0.2 mm (SD 1.1 mm) in the craniocaudal direction. The largest displacement of 2.7 mm was seen in the cranio-caudal direction, with 95% of displacements<2 mm in any direction.
The results indicate that the setup error of the presented mask system evaluated by CT verification scans and portal imaging are minimal. Reproducibility of the isocenter position is in the best range of positioning reproducibility reported for other stereotactic systems.
评估使用立体定向面罩固定系统的分次立体定向放射治疗(FSRT)的准确性。
本研究纳入了 16 例接受 FSRT 治疗的患者。使用商业立体定向面罩固定系统(BrainLAB AG)对患者进行固定。在 FSRT 治疗前后获取的一系列 CT 扫描用于通过比较等中心点位置评估患者固定的准确性。每天获取的门户成像用于建立每天的患者位置变化。沿不同方向计算位移误差作为系统误差和随机误差的组合。
基于定位和验证 CT 成像的等中心点位移平均值为 0.1mm(SD 0.3mm),侧向方向为 0.1mm(SD 0.4mm),前后方向为 0.3mm(SD 0.4mm)。3D 位移的平均值为 0.5mm(SD 0.4mm),最大为 1.4mm。在治疗过程中未发现显著差异(P=0.4)。通过 456 个前侧和侧面门户图像计算的总等中心点位移在侧向方向为 0.3mm(SD 0.9mm),在前后方向为-0.2mm(SD 1mm),在颅尾方向为 0.2mm(SD 1.1mm)。最大位移为 2.7mm,在颅尾方向,95%的位移在任何方向均<2mm。
结果表明,通过 CT 验证扫描和门户成像评估的所提出面罩系统的设置误差最小。等中心点位置的可重复性处于其他立体定向系统报道的定位可重复性的最佳范围内。