Haworth S T, Linehan J H, Bronikowski T A, Dawson C A
Department of Biomedical Engineering, Marquette University, Milwaukee 53233.
J Appl Physiol (1985). 1991 Jan;70(1):15-26. doi: 10.1152/jappl.1991.70.1.15.
The published morphometric data from human, cat, and dog lungs suggest that the power-law relationships between the numbers (Na and Nv) and diameters (Da and Dv) of arteries and veins and between the lengths (La and Lv) and diameters of the arteries and veins could be used as scaling rules for assigning dimensions and numbers to the intrapulmonary vessels of the arterial and venous trees of the dog lung. These rules, along with the dimensions of the extrapulmonary arteries and capillary sheet and the distensibility coefficients of the vessels obtained from the literature, were used to construct a steady-state hemodynamic model of the dog lung vascular bed. The model can be characterized approximately by 15 orders of arteries with Na approximately 2.07 Da-2.58 and 13 orders of veins with Nv approximately 2.53 Dv-2.61. For the intrapulmonary vessels (orders 1-12), La approximately 4.85 Da1.01, and Lv approximately 6.02 Da1.07. The average ratio of the numbers of vessels in consecutive orders is approximately 3.2 for the arteries and veins. These arterial and venous trees are connected by the capillary sheet with an undistended thickness of approximately 3.5 microns and an area of 33 m2. The average distensibility (% increase in diameter over the undistended diameter/Torr increase in transmural pressure) for the model arteries and veins is approximately 2.4%/Torr, and the distensibility of the capillary sheet (% increase in thickness over the undistended thickness/Torr increase in transmural pressure) is approximately 3.6%/Torr. The calculated arterial-capillary-venous volumes and compliances of the model agree well with experimental estimates of these variables in dogs. In addition, the model appears consistent with certain aspects of the pressure-flow relationships measured in dog lungs. The model appears to be a useful summary of some of the available data on pulmonary morphometry and vessel properties. It is anticipated that the model will provide the basis for dynamic modeling of the dog lung in the future.
来自人类、猫和狗肺脏已发表的形态测量数据表明,动脉和静脉的数量(Na和Nv)与直径(Da和Dv)之间以及长度(La和Lv)与直径之间的幂律关系,可用作给狗肺的动脉和静脉树的肺内血管分配尺寸和数量的缩放规则。这些规则,连同肺外动脉和毛细血管床的尺寸以及从文献中获得的血管扩张系数,被用于构建狗肺血管床的稳态血流动力学模型。该模型大约可由15级动脉(Na约为2.07Da-2.58)和13级静脉(Nv约为2.53Dv-2.61)来表征。对于肺内血管(1-12级),La约为4.85Da1.01,Lv约为6.02Da1.07。动脉和静脉连续级别的血管数量平均比约为3.2。这些动脉和静脉树通过厚度约为3.5微米、面积为33平方米的未扩张毛细血管床相连。模型动脉和静脉的平均扩张性(直径相对于未扩张直径的增加百分比/跨壁压力每增加1托)约为2.4%/托,毛细血管床的扩张性(厚度相对于未扩张厚度的增加百分比/跨壁压力每增加1托)约为3.6%/托。模型计算出的动脉-毛细血管-静脉体积和顺应性与狗的这些变量的实验估计值非常吻合。此外,该模型似乎与在狗肺中测量的压力-流量关系的某些方面一致。该模型似乎是肺形态测量和血管特性一些现有数据的有用总结。预计该模型将为未来狗肺的动态建模提供基础。