Galie Peter, Spilker Robert L
Department of Biomedical Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180-3590, USA.
J Biomech Eng. 2009 Nov;131(11):111004. doi: 10.1115/1.3212108.
This study utilizes a finite element model to characterize the transendothelial transport through overlapping endothelial cells in primary lymphatics during the uptake of interstitial fluid. The computational model is built upon the analytical model of these junctions created by Mendoza and Schmid-Schonbein (2003, "A Model for Mechanics of Primary Lymphatic Valves," J. Biomed. Eng., 125, pp. 407-414). The goal of the present study is to investigate how adding more sophisticated and physiologically representative biomechanics affects the model's prediction of fluid uptake. These changes include incorporating a porous domain to represent interstitial space, accounting for finite deformation of the deflecting endothelial cell, and utilizing an arbitrary Lagrangian-Eulerian algorithm to account for interacting and nonlinear mechanics of the junctions. First, the present model is compared with the analytical model in order to understand its effects on parameters such as cell deflection, pressure distribution, and velocity profile of the fluid entering the lumen. Without accounting for the porous nature of the interstitium, the computational model predicts greater cell deflection and consequently higher lymph velocities and flow rates than the analytical model. However, incorporating the porous domain attenuates the cell deflection and flow rate to values below that predicted by the analytical model for a given transmural pressure. Second, the present model incorporates recent experimental data for parameters such as lymph viscosity, transmural pressure measurements, and others to evaluate the ability of these junctions to act as unidirectional valves. The volume of flow through the valve is calculated to be 0.114 nL/microm per cycle for a transmural pressure varying between 8.0 mm Hg and -1.0 mm Hg at 0.4 Hz. Though experimental data for the absorption of lymph through these endothelial junctions are scarce, several measurements of lymph velocity and flow rates are cited to validate the present model.
本研究利用有限元模型来描述在间质液摄取过程中,初级淋巴管中重叠内皮细胞间的跨内皮运输。该计算模型基于门多萨和施密德 - 舍恩拜因(2003年,《初级淋巴瓣膜力学模型》,《生物医学工程杂志》,第125卷,第407 - 414页)创建的这些连接的分析模型构建。本研究的目标是探究添加更复杂且具有生理代表性的生物力学因素如何影响模型对液体摄取的预测。这些变化包括纳入一个多孔区域来代表间质空间,考虑偏转内皮细胞的有限变形,并使用任意拉格朗日 - 欧拉算法来考虑连接的相互作用和非线性力学。首先,将当前模型与分析模型进行比较,以了解其对诸如细胞偏转、压力分布以及进入管腔的液体速度剖面等参数的影响。在不考虑间质的多孔性质时,计算模型预测的细胞偏转更大,因此与分析模型相比,淋巴速度和流速更高。然而,纳入多孔区域会使细胞偏转和流速减弱至低于给定跨壁压力下分析模型预测的值。其次,当前模型纳入了诸如淋巴粘度、跨壁压力测量等参数的最新实验数据,以评估这些连接作为单向瓣膜的能力。对于在0.4赫兹下跨壁压力在8.0毫米汞柱和 - 1.0毫米汞柱之间变化的情况,通过瓣膜的流量计算为每周期0.114纳升/微米。尽管通过这些内皮连接吸收淋巴的实验数据很少,但引用了一些淋巴速度和流速的测量值来验证当前模型。