ThoMSon Mass Spectrometry Laboratory, University of Campinas-UNICAMP, Institute of Chemistry, 13083-970 Campinas, SP, Brazil.
Anal Chem. 2010 May 15;82(10):3990-6. doi: 10.1021/ac100673v.
An ambient ionization/desorption technique, namely, easy ambient sonic-spray ionization mass spectrometry (EASI), has been applied to crude oil samples. From a single droplet of the sample placed on an inert surface, EASI(+/-) is shown to promote efficient desorption and ionization of a myriad of polar components via the action of its cloud of very minute supersonic bipolar charged droplets. The gaseous M + H and M - H ions concurrently formed by EASI(+/-) were analyzed by Fourier transform mass spectrometry (FT-ICR MS), and a total of approximately 6000 acidic and basic components have been attributed. EASI(+/-) FT-ICR MS of crude oils is show to be almost as fast as ESI(+)/ESI(-) FT-ICR MS, providing similar compositional information of polar components and spectral quality comparable to that of a commercial nonochip-based robotic ESI device. EASI(+/-) requires no sample workup thus eliminating risks of contamination during sample manipulation and memory effects because of carry over in pumping ESI lines. More importantly, EASI(+/-) is a voltage-free ionization technique therefore eliminating risks of redox processes or duality of ionization mechanisms that can be observed in voltage-assisted processes. Data visualization via typical petroleomic plots confirms the similarity of the compositional information provided by EASI(+/-) compared to ESI(+)/ESI(-). The ambient EASI(+/-) FT-ICR MS method requires no voltage switching in changing the ion polarity mode, offering a workup, heating and voltage-free protocol for petroleomic studies performed at open atmosphere directly on the undisturbed crude oil sample.
一种环境离子化/解吸技术,即简单环境超声喷雾电离质谱(EASI),已被应用于原油样品。从放置在惰性表面上的单个样品液滴中,可以看出 EASI(+/-) 通过其非常微小的超音速双极性带电液滴云的作用,促进了大量极性成分的有效解吸和电离。通过傅里叶变换质谱(FT-ICR MS)分析 EASI(+/-) 同时形成的气态M + H和M - H离子,共鉴定出约 6000 种酸性和碱性成分。EASI(+/-)FT-ICR MS 对原油的分析速度几乎与 ESI(+)/ESI(-)FT-ICR MS 一样快,提供了相似的极性成分组成信息和与商用非芯片基机器人 ESI 装置相当的谱图质量。EASI(+/-) 不需要样品制备,因此消除了在样品处理过程中因污染和残留而导致的污染风险。更重要的是,EASI(+/-)是一种无电压电离技术,因此消除了在电压辅助过程中观察到的氧化还原过程或双重电离机制的风险。通过典型的石油组学图进行数据可视化,证实了 EASI(+/-)与 ESI(+)/ESI(-)相比提供的组成信息的相似性。环境 EASI(+/-)FT-ICR MS 方法在改变离子极性模式时不需要切换电压,为在开放大气条件下直接对未受干扰的原油样品进行石油组学研究提供了一种无需处理、加热和无电压的方案。