Suppr超能文献

三种不同 TKR 设计的术中膝关节屈曲比较研究。

Comparative study of intraoperative knee flexion with three different TKR designs.

机构信息

Department of Orthopaedics, André-Mignot-Versailles Hospital Center, 78150 Le Chesnay, France.

出版信息

Orthop Traumatol Surg Res. 2010 May;96(3):242-8. doi: 10.1016/j.otsr.2009.12.006. Epub 2010 Apr 14.

Abstract

INTRODUCTION

Substantial flexion after total knee arthroplasty (TKA) is required for certain categories of patients who wish to squat or kneel in their daily life. Many factors influence this postoperative flexion, including the prosthesis design. It is therefore valuable to in vivo analyze these factors on three knee prosthesis designs through a study of their intraoperative flexion.

HYPOTHESIS

The posterior-stabilized (PS) knee prostheses provide better intraoperative flexion than the ultracongruent (UC) model. Of the currently available PS models, the high-flexion ones have better intraoperative flexion than standard models. Our main focus endpoint was the intraoperative flexion achieved, before soft-tissues closure, during TKA surgical procedure.

PATIENTS AND METHODS

This was a controlled study. Seventy-two osteoarthritic knees requiring TKA were included to compare three selected prosthesis models: the SAL ultracongruent and two PS models (the standard LPS and the LPS Flex). This was a single-operator study, with patients divided into three homogenous, comparable groups, in which intraoperative measurement of flexion was performed using computer-assisted navigation. Statistical analysis allowed comparison of the three models.

RESULTS

Intraoperatively, after prosthesis implantation, before soft-tissues closure, the mean flexion of the LPS-Flex was 134 degrees versus 124 degrees for the SAL (p=0.0004); the mean flexion of the standard LPS model was 130 degrees versus 124 degrees for the SAL (p=0.14); the PS Flex model showed no significant difference (p=0.26) in flexion (134 degrees) compared to the standard model (130 degrees). The SAL ultracongruent model seemed to be a factor reducing the intraoperative flexion by 8 degrees compared to the PS models (p<10(-4)).

DISCUSSION

In this study, the PS designs (standard or Flex) provided better intraoperative flexion than the SAL ultracongruent design. However, the LPS Prosthesis did not demonstrate superiority over the standard LPS Prosthesis.

LEVEL OF EVIDENCE

Level III, low-power prospective study.

摘要

引言

对于希望在日常生活中深蹲或跪地的某些类别患者,全膝关节置换术后需要有较大的屈曲度。许多因素会影响术后的屈曲度,包括假体设计。因此,通过研究三种膝关节假体的术中屈曲度,对这些因素进行活体分析是有价值的。

假设

后稳定型(PS)膝关节假体比超顺行(UC)模型提供更好的术中屈曲度。在现有的 PS 模型中,高屈曲度模型比标准模型具有更好的术中屈曲度。我们的主要关注点是在 TKA 手术过程中,在软组织关闭之前,获得的术中屈曲度。

患者和方法

这是一项对照研究。共纳入 72 例需要 TKA 的骨关节炎膝关节,比较三种选定的假体模型:SAL 超顺行和两种 PS 模型(标准 LPS 和 LPS Flex)。这是一项单手术者研究,将患者分为三组,每组均为同质且可比,其中使用计算机辅助导航对术中屈曲度进行测量。统计分析允许比较三种模型。

结果

术中,在植入假体后,在软组织关闭之前,LPS-Flex 的平均屈曲度为 134 度,而 SAL 为 124 度(p=0.0004);标准 LPS 模型的平均屈曲度为 130 度,而 SAL 为 124 度(p=0.14);PS Flex 模型与标准模型(130 度)相比,屈曲度(134 度)无显著差异(p=0.26)。与 PS 模型相比,SAL 超顺行模型似乎是一个将术中屈曲度降低 8 度的因素(p<10(-4))。

讨论

在这项研究中,PS 设计(标准或 Flex)提供了比 SAL 超顺行设计更好的术中屈曲度。然而,LPS 假体并没有比标准 LPS 假体表现出优越性。

证据水平

三级,低功率前瞻性研究。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验