Department of Orthopaedics, Leiden University Medical Center, Albinusdreef 2, P.O. Box 9600, 2300 RC Leiden, The Netherlands. E-mail address for M.J. Nieuwenhuijse:
J Bone Joint Surg Am. 2013 Oct 2;95(19):e1411-11. doi: 10.2106/JBJS.L.01523.
High-flexion total knee arthroplasty was introduced to meet the demands of daily activity requiring increased knee flexion. However, concerns have been raised regarding the fixation of high-flexion total knee arthroplasty components and increased rates of loosening have been reported. To date, migration, and thus fixation, of high-flexion total knee arthroplasty components has not been analyzed and the preferential bearing type (mobile or fixed) is unknown.
Of eighty-six consecutive eligible patients, seventy-four patients (seventy-eight knees) scheduled for total knee arthroplasty were randomized to one of four Legacy Posterior Stabilized (LPS) total knee prosthesis designs: (1) LPS-Flex mobile, (2) LPS-Flex fixed, (3) LPS mobile, and (4) LPS fixed. The primary outcome was component migration measured with use of Roentgen stereophotogrammetric analysis, and secondary outcomes were postoperative knee flexion and extension and Knee Society Score. Patients were evaluated postoperatively at six, twelve, twenty-six, and fifty-two weeks and annually thereafter. At the five-year follow-up, eight patients had died and two patients were lost to follow-up. Seventy-seven tibial and forty-two femoral components were suitable for migration measurements.
The overall five-year migration of the seventy-seven tibial components was not significantly different among the four total knee prosthesis designs (compared with the LPS fixed design, the range of overall mean differences for the other three designs was 0.02 to 0.25 mm) and migration was comparable at the two and five-year follow-up. Migration stabilized in all but three components (two LPS-Flex mobile and one LPS fixed); one of these components has already been revised and was aseptically loose. The overall five-year migration of the forty-two femoral components was comparable among the four designs (compared with the LPS fixed design, the range of overall mean differences for the other three designs was 0.01 to 0.18 mm) and was similar at two and five years postoperatively. One femoral component (LPS-Flex mobile) migrated excessively. In patients who had a mean postoperative flexion of ≥ 125° or a maximum flexion of ≥ 135° during the one to five-year follow-up period, migration of high-flexion components was comparable with that of conventional components and indicative of appropriate fixation. Postoperative flexion, extension, Knee Society Score, and Knee Society Score function were comparable during the five-year follow-up period and at the two and five-year follow-up.
The LPS-Flex total knee prosthesis with either a mobile or a fixed bearing had migration comparable that of with its conventional counterpart and is expected to have similar (excellent) long-term survival in these patients.
Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.
高屈曲度全膝关节置换术的引入是为了满足日常活动中对更大膝关节屈曲度的需求。然而,人们对高屈曲度全膝关节置换术组件的固定提出了担忧,并报告了更高的松动率。迄今为止,高屈曲度全膝关节置换术组件的迁移情况,因此固定情况,尚未进行分析,也不知道首选的轴承类型(活动或固定)。
在 86 例连续符合条件的患者中,74 例(78 膝)计划接受全膝关节置换术的患者被随机分配到四种 Legacy Posterior Stabilized(LPS)全膝关节假体设计之一:(1)LPS-Flex 活动型,(2)LPS-Flex 固定型,(3)LPS 活动型和(4)LPS 固定型。主要结局是使用 X 线体层摄影分析测量的组件迁移,次要结局是术后膝关节的屈曲和伸展以及膝关节协会评分。患者在术后 6、12、26 和 52 周以及此后每年进行评估。在 5 年随访时,8 例患者死亡,2 例患者失访。77 个胫骨和 42 个股骨组件适合进行迁移测量。
四种全膝关节假体设计中,77 个胫骨组件的整体 5 年迁移差异无统计学意义(与 LPS 固定设计相比,其他三种设计的整体平均差异范围为 0.02 至 0.25 毫米),并且在两年和五年随访时的迁移情况相似。除了三个组件(两个 LPS-Flex 活动型和一个 LPS 固定型)外,所有组件的迁移均稳定;其中一个组件已经进行了翻修,并且无菌性松动。四个设计中 42 个股骨组件的整体 5 年迁移差异无统计学意义(与 LPS 固定设计相比,其他三个设计的整体平均差异范围为 0.01 至 0.18 毫米),并且在术后两年和五年时相似。一个股骨组件(LPS-Flex 活动型)迁移过度。在术后平均屈曲度≥125°或术后 1 至 5 年随访期间最大屈曲度≥135°的患者中,高屈曲度组件的迁移与常规组件相似,表明固定适当。在 5 年随访期间和两年及五年随访时,术后屈曲度、伸展度、膝关节协会评分和膝关节协会评分功能相似。
LPS-Flex 全膝关节假体采用活动或固定轴承,其迁移情况与常规假体相似,预计在这些患者中具有相似的(优秀)长期存活率。
治疗水平 I。请参阅作者说明,以获取完整的证据水平描述。