Suppr超能文献

凝集素结合红细胞的分离。I. 破坏分子点附着的力。

Detachment of agglutinin-bonded red blood cells. I. Forces to rupture molecular-point attachments.

作者信息

Evans E, Berk D, Leung A

机构信息

Department of Pathology, University of British Columbia, Vancouver, Canada.

出版信息

Biophys J. 1991 Apr;59(4):838-48. doi: 10.1016/S0006-3495(91)82296-2.

Abstract

A simple micromechanical method has been developed to measure the rupture strength of a molecular-point attachment (focal bond) between two macroscopically smooth membrane capsules. In the procedure, one capsule is prepared with a low density coverage of adhesion molecules, formed as a stiff sphere, and held at fixed position by a micropipette. The second capsule without adhesion molecules is pressurized into a spherical shape with low suction by another pipette. This capsule is maneuvered to initiate point contact at the pole opposite the stiff capsule which leads to formation of a few (or even one) molecular attachments. Then, the deformable capsule is slowly withdrawn by displacement of the pipette. Analysis shows that the end-to-end extension of the capsule provides a direct measure of the force at the point contact and, therefore, the rupture strength when detachment occurs. The range for point forces accessible to this technique depends on the elastic moduli of the membrane, membrane tension, and the size of the capsule. For biological and synthetic vesicle membranes, the range of force lies between 10(-7)-10(-5) dyn (10(-12)-10(-10) N) which is 100-fold less than presently measurable by Atomic Force Microscopy! Here, the approach was used to study the forces required to rupture microscopic attachments between red blood cells formed by a monoclonal antibody to red cell membrane glycophorin, anti-A serum, and a lectin from the snail-helix pomatia. Failure of the attachments appeared to be a stochastic function of the magnitude and duration of the detachment force. We have correlated the statistical behavior observed for rupture with a random process model for failure of small numbers of molecular attachments. The surprising outcome of the measurements and analysis was that the forces deduced for short-time failure of 1-2 molecular attachments were nearly the same for all of the agglutinin, i.e., 1-2 x 10(-6) dyn. Hence, microfluorometric tests were carried out to determine if labeled agglutinins and/or labeled surface molecules were transferred between surfaces after separation of large areas of adhesive contact. The results showed that the attachments failed because receptors were extracted from the membrane.

摘要

已开发出一种简单的微机械方法来测量两个宏观光滑膜囊泡之间分子点附着(焦点键)的断裂强度。在该过程中,制备一个具有低密度粘附分子覆盖的囊泡,使其形成坚硬球体,并通过微量移液器固定在固定位置。第二个没有粘附分子的囊泡通过另一个移液器以低吸力加压成球形。将该囊泡操纵至与坚硬囊泡相对的极点处开始点接触,这会导致形成一些(甚至一个)分子附着。然后,通过移液器的位移缓慢撤回可变形囊泡。分析表明,囊泡的端到端延伸提供了点接触处力的直接测量值,因此,也是分离发生时的断裂强度。该技术可达到的点力范围取决于膜的弹性模量、膜张力和囊泡大小。对于生物和合成囊泡膜,力的范围在10^(-7)-10^(-5)达因(10^(-12)-10^(-10)牛)之间,这比目前原子力显微镜可测量的力小100倍!在此,该方法用于研究由抗红细胞膜糖蛋白单克隆抗体、抗A血清和蜗牛-螺旋蜗牛凝集素形成的红细胞之间微观附着断裂所需的力。附着的失败似乎是分离力大小和持续时间的随机函数。我们已将观察到的断裂统计行为与少量分子附着失败的随机过程模型相关联。测量和分析的惊人结果是,对于所有凝集素,1-2个分子附着短时间失败所推断的力几乎相同,即1-2×10^(-6)达因。因此,进行了微荧光测试,以确定在大面积粘附接触分离后,标记的凝集素和/或标记的表面分子是否在表面之间转移。结果表明,附着失败是因为受体从膜中被提取出来。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/530a/1281249/897b5aaa51d6/biophysj00115-0078-a.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验