Rouleau Leonie, Farcas Monica, Tardif Jean-Claude, Mongrain Rosaire, Leask Richard L
Department of Chemical Engineering, McGill University, 3610 University, Montreal, QC, H3A 2B2, Canada.
J Biomech Eng. 2010 Aug;132(8):081013. doi: 10.1115/1.4001891.
Endothelial cells are known to respond to hemodynamic forces. Their phenotype has been suggested to differ between atheroprone and atheroprotective regions of the vasculature, which are characterized by the local hemodynamic environment. Once an atherosclerotic plaque has formed in a vessel, the obstruction creates complex spatial gradients in wall shear stress. Endothelial cell response to wall shear stress may be linked to the stability of coronary plaques. Unfortunately, in vitro studies of the endothelial cell involvement in plaque stability have been limited by unrealistic and simplified geometries, which cannot reproduce accurately the hemodynamics created by a coronary stenosis. Hence, in an attempt to better replicate the spatial wall shear stress gradient patterns in an atherosclerotic region, a three dimensional asymmetric stenosis model was created. Human abdominal aortic endothelial cells were exposed to steady flow (Re=50, 100, and 200 and tau=4.5 dyn/cm(2), 9 dyn/cm(2), and 18 dyn/cm(2)) in idealized 50% asymmetric stenosis and straight/tubular in vitro models. Local morphological changes that occur due to magnitude, duration, and spatial gradients were quantified to identify differences in cell response. In the one dimensional flow regions, where flow is fully developed and uniform wall shear stress is observed, cells aligned in flow direction and had a spindlelike shape when compared with static controls. Morphological changes were progressive and a function of time and magnitude in these regions. Cells were more randomly oriented and had a more cobblestone shape in regions of spatial wall shear stress gradients. These regions were present, both proximal and distal, at the stenosis and on the wall opposite to the stenosis. The response of endothelial cells to spatial wall shear stress gradients both in regions of acceleration and deceleration and without flow recirculation has not been previously reported. This study shows the dependence of endothelial cell morphology on spatial wall shear stress gradients and demonstrates that care must be taken to account for altered phenotype due to geometric features. These results may help explain plaque stability, as cells in shoulder regions near an atherosclerotic plaque had a cobblestone morphology indicating that they may be more permeable to subendothelial transport and express prothrombotic factors, which would increase the risk of atherothrombosis.
已知内皮细胞会对血流动力学力作出反应。有研究表明,在血管的易发生动脉粥样硬化区域和具有抗动脉粥样硬化作用的区域,内皮细胞的表型有所不同,这些区域的特征在于局部血流动力学环境。一旦血管中形成动脉粥样硬化斑块,阻塞就会在壁面剪应力中产生复杂的空间梯度。内皮细胞对壁面剪应力的反应可能与冠状动脉斑块的稳定性有关。不幸的是,关于内皮细胞参与斑块稳定性的体外研究一直受到不切实际且简化的几何形状的限制,这些几何形状无法准确再现冠状动脉狭窄所产生的血流动力学。因此,为了更好地复制动脉粥样硬化区域的空间壁面剪应力梯度模式,创建了一个三维不对称狭窄模型。将人腹主动脉内皮细胞置于理想化的50%不对称狭窄和直/管状体外模型中,使其暴露于稳定流(雷诺数Re = 50、100和200,切应力τ = 4.5达因/平方厘米、9达因/平方厘米和18达因/平方厘米)。对因大小、持续时间和空间梯度而发生的局部形态变化进行量化,以识别细胞反应的差异。在一维流动区域,即流动充分发展且观察到均匀壁面剪应力的区域,与静态对照相比,细胞沿流动方向排列并呈纺锤形。在这些区域,形态变化是渐进的,并且是时间和大小的函数。在空间壁面剪应力梯度区域,细胞的取向更随机,形状更像鹅卵石。这些区域在狭窄部位的近端和远端以及与狭窄部位相对的壁面上均存在。此前尚未报道内皮细胞在加速和减速区域以及无血流再循环情况下对空间壁面剪应力梯度的反应。本研究表明了内皮细胞形态对空间壁面剪应力梯度的依赖性,并证明必须考虑到由于几何特征导致的表型改变。这些结果可能有助于解释斑块稳定性,因为动脉粥样硬化斑块附近肩部区域的细胞具有鹅卵石形态,这表明它们可能对内皮下单向转运更具通透性,并表达促血栓形成因子,这会增加动脉粥样硬化血栓形成的风险。